BX Club Forum

UPDATE:
I managed to (practically accidentally) source a set in the Netherlands. They come with their retaining rings so I will just have to glue...

Cheers- also looking to quieten my exhaust! I have a scorpion cross box but have reverted to standard tailpipe. Still too loud though

Good luck with the project.

You may have difficulty sourcing 4x4 parts.

There’s a project that’s been mentioned about using the front struts on the...

Can't help with the tow bar but I'm loving your break 8)

Hi again,

A forum member - James - has been in touch, and we've agreed on the sale of the 16V pending a few further pics, which I'm sorting today....

I will have a look for you in my treasure trove

Hi John & All,

I will have a silver 16v Ph2 for sale, however is LHD, as use it in France - immaculate, will need a new dash at some stage have no...

'arrived in UK' usually means someone didn't fill the paperwork in (right) on the import and you'll shortly get a Brexit tax bill

It turned out...

Morning everyone sorry haven’t been able to get on the page to update.
I’ve advertised the car now see:

All pics are on there and history ect

Here is the gearbox ratio table. However the tables do not show 4x4 box ratios but if it has the standard 8v GTi ratios then the TD 5th gear would be...

Depending on what's wrong with your current one, it might be easier to contact Pleiades in Sawtry, Huntingdon & get them to rebuild it. They're good...

It might be easier to measure it before it falls off, then cut one out from a sheet of metal, shape it, drill the holes and fit it to the car. With a...

:( It will help others survive though

Chevronics in Hitchin

Yes the previous owner Bob, went to Bristol to buy the car and drove it up to the highlands. Thanks for input Tim!

I tried referencing the pipe numbers in a couple of ways at the weekend but drew a complete blank.

Likewise - no matches except for 96033143 which...

Welcome, as above some parts are bespoke,

The exhaust for one, you will need to get one made as they are just not available.

Cheers - used to have some standard ones I'm pretty sure but think they must be long gone or very deeply buried.

Are front and rears the same. Certainly the fronts are easier to remove!

Hi
Is the car still available and is there an interior in it please?

HI Philip,

Thanks for getting us in contact, sorry I wasn't getting notifications from forum and hadn't had a chance to check it.

Regards

Lloyd

HI I have an estate for parts, just south of Dublin, Ireland if any interest, Originally UK car , 1992, Turbo diesel.
but in need of a lot of...

Shipping will be approx £16.

Cheers Jaba I might even have a front one here, wasn't aware they were swappable.

Hi Routemaster,
Sorry wasn't ignoring you just hadn't seen your post. pm'd

Heath Robinson has a lot to answer for. Good job.

Those are precisely the ones John! Unfortunately, the Berlingo sump has a smaller diameter hole for the bushes and bolts, so the BX bushes don't fit....

These are now sold.

Now sorted thanks

Thanks for your advice.
As far as I can tell, no welding is required.
I welded up some rust areas at the rear of the sills a year or so ago.
I am...

What colour?
Sure there was some speaker grilles amongst all the bits I gave to Luke Toddman of this forum maybe pm him.
Can't help with boot carpet...

Sorry they’ve gone 🙁

Cheers for that David, I think I may have lost a bag of small bits from when I stripped the car out years ago everything was bagged/boxed but these...

Brian,
If you are unable to text me you can email me andrewbage@yahoo.com - one final question - how old is the battery? See you next week....