cheap BX spares.

Anything about BXs
tom
Citroen Sorceror
Posts: 1239
Joined: Fri May 20, 2005 8:51 pm
Location: straddling the channel

cheap BX spares.

Post by tom » Tue Aug 16, 2005 6:07 pm

Andy Lamb who you'll find elsewhere on this site under specialists will be at the CCC Stratford on Avon event with the old stock he's bought from the Wyatts group. This stuff is seriously cheap for clearance. Lots of trim and doors and wings. New Door £25 for example. That which he hasn't sold will be catalogued and kept. I've offered to take some time off to collate the remaining bits and will circulate the data once it is done in a few weeks' time. His business is repairs, so he won't want to be bothered with a load of us bothering him for bits so PM me with what you want and I'll fax a list to him. It is strictly pot luck if he has it but it is all cheap. I bought his pair of ABS rear hubs for £20, abs sensors £10 a hit, HC £15, PR& Doseur for £20 each. If you want bits
you have until Friday at 9AM .which is when I'll fax him with your requirements. That way you'll get in first or just go to Stratford on Saturday and buy it there

User avatar
Vanny
Merseyside resident
Merseyside resident
Posts: 3421
Joined: Tue May 17, 2005 11:48 pm
Location: BX Pub
My Cars: BX 16v Ph2
x 11

Post by Vanny » Tue Aug 16, 2005 6:34 pm

is that stuff al new?

i'm in need of a few bits, rear arms and a dosier valve specifically!

front height corrector too, im having prolems with mine and if it's cheap i'll just swap it!

tom
Citroen Sorceror
Posts: 1239
Joined: Fri May 20, 2005 8:51 pm
Location: straddling the channel

Post by tom » Tue Aug 16, 2005 7:03 pm

New in box

User avatar
Vanny
Merseyside resident
Merseyside resident
Posts: 3421
Joined: Tue May 17, 2005 11:48 pm
Location: BX Pub
My Cars: BX 16v Ph2
x 11

Post by Vanny » Tue Aug 16, 2005 7:55 pm

any idea on prices for those bits mentioned above?

tom
Citroen Sorceror
Posts: 1239
Joined: Fri May 20, 2005 8:51 pm
Location: straddling the channel

Post by tom » Tue Aug 16, 2005 8:10 pm

RTFM.
I don't think that he has rear arms. I thought your problems were at the other end.

User avatar
Vanny
Merseyside resident
Merseyside resident
Posts: 3421
Joined: Tue May 17, 2005 11:48 pm
Location: BX Pub
My Cars: BX 16v Ph2
x 11

Post by Vanny » Tue Aug 16, 2005 9:56 pm

my problems are at the other end, but mat with the st tropez has very shot rear arms! I have a sticky front height corrector which lubing isnt solving, that said the new accumulator has worked wonders else wher, so there is a good chance it has solved that problem too!

I do have a rather leaky dosseur valve, and there is a lot of leak back from the brakes.

User avatar
DLM
Our Trim Guru
Posts: 1569
Joined: Mon May 16, 2005 6:41 pm
Location: Gosport, Hampshire, UK
My Cars: None since the last BX.
x 1

Post by DLM » Fri Aug 19, 2005 11:25 am

Andy Lamb does have a non-ABS rear arm somewhere that he was looking at £15 for when I asked earlier this week. Don't know which side. If you're interested, then ring another time, or get one of his locals to enquire about it (e.g. me or Tom), as it's not with the NOS parts stock AFAIK. I may have access to between 2 and 4 non-abs rear arms soon - and know of non-abs arms in a local scrappy for £30 a side THIS WEEKEND (then the car in question's being crushed). Very accessible as they're overhanging the front part of a Transit.

User avatar
DLM
Our Trim Guru
Posts: 1569
Joined: Mon May 16, 2005 6:41 pm
Location: Gosport, Hampshire, UK
My Cars: None since the last BX.
x 1

Post by DLM » Fri Aug 19, 2005 11:29 am

Advanced Vehicle Spares, Main Rd, Colden Common, Winchester, SO21 1RP Tel: 01962 714212. They also have a red gone-to-seed TZD turbo, 189k, with front hubs and bonnet spoken for already (and no C-pillar trim since yesterday).