Replacing rear quarterlight

Frequently asked technical questions and common modifications/improvements
User avatar
Phil Peters
Confirmed BX'er
Posts: 46
Joined: Sun Feb 03, 2013 7:15 pm
Location: Warwickshire, UK

Replacing rear quarterlight

Post by Phil Peters » Mon Feb 18, 2013 9:02 am

Hi all,

I fitted a new quarter light a couple of weekends ago but haven't had time to update this thread since then. I'm sure there are other ways to complete this job but here's a couple of 'field notes' from a first-timer for anyone who's curious.

Here's Maurice wearing his temporary rear window covering. I can thoroughly recommend plastic bags from Paperchase for this job. I folded it over the window frame to create a double skin (double glazing?) and we drove the car around like this for a week without a drop of rain getting in, even on motorway journeys.

Image

Once the Paperchase window was removed, the first job was to get the remainder of the broken glass out of the rubber window surround. Removing the rubber surround will probably shower most of the remaining bits of broken glass all over the show, so make sure you have a broom or a hoover handy. Once the surround is out of the car you can just poke the rest of the glass out with a slim screwdriver, being careful not to tear the rubber.

Image

To create enough access for refitting the new glass, you need to wind the main rear window down and then pull the trim over to the right-hand side. The plastic trim piece in the middle of the photo can be fully removed and that's probably worth doing at this stage.

Image

NOS piece of glass waiting to be refitted:

Image

New glass fitted into rubber window surround. The Haynes manual mentioned something about putting a thin bead of mastic into the surround but I couldn't see any evidence that this had been done on my car so in the interests of sticking to original form, I didn't break out the mastic gun here. Hopefully this decision won't come back to bite me on the arse at a later date.

Image

You will undoubtedly be feeling fairly smug with yourself by this point and will almost be able to taste the celebratory tea and biscuits at the end of a job well done. Whoa there sunshine, step away from the biscuit barrel because this is where things get interesting. I concur with Paul and Tim that this next step is fiddly, although fortunately I was able to call on another pair of hands at this point which did make things easier. To improve access for fitting the new glass in place, I removed part of the inner door card and moved it downwards out of the way.

Image

I also gave the rubber window surround a quick blast with silicone seal lubricant to help it slide into the window channel a bit easier. Then, working from the inside of the door, we slid the glass into position towards the back of the door. Applying firm but consistent pressure seemed to work well here. The trim removal tool which I'd used for the door card was also helpful for gently pushing the rubber window surround over the lip of the window channel in some areas.

Image

Once the glass finally slots into place, it's simply a case of refitting the various trim pieces and then you really can reach for the biscuit barrel.
Last edited by Phil Peters on Mon Feb 18, 2013 10:07 am, edited 1 time in total.

1992 BX19 TGD (aka Maurice), N/A diesel, silver with Zenith trim.

User avatar
Tim Leech
Over 2k
Posts: 15061
Joined: Tue Apr 15, 2008 11:12 am
Location: Burton on Trent
My Cars: 1963 VW BEETLE 1200 KGJ413A
1972 Morris Marina 1.8 SDL BFA720L
1979 Rover SD1 3.5 V8-S ERC742T
1980 Morris Marina 1.7HL DBV468W
1985 CITROEN BX 19GT C1TBX
1991 CITROEN BX 19TZI AUTO A/C TAL91S
1994 CITROEN XANTIA 1.8 SXi M908HRY
1998 Rover 75 V6 Connoisseur Auto S392DEH
2002 Rover 75 CDT Connossieur SE Nav R40TSL
2003 Rover 25 1.6i XL L33CHT
x 45

Re: BX break in

Post by Tim Leech » Mon Feb 18, 2013 9:45 am

Well done that man! =D>
1985 BX 19GT Mk1
1991 BX 19TZI Auto A/C
1994 Xantia 1.8i SX
1972 Morris Marina 1.8 SDL
1979 Rover SD1 V8-S
1980 Morris Marina 1.7HL
1998 Rover 75 2.0V6 Connoisseur Auto
2002 Rover 75 CDT Connossieur SE Nav
2002 Rover 45 1.6i Spirit S Special
2003 Rover 25 1.6i XL 5 DR

mds141
Over 2k
Posts: 5269
Joined: Sat Jul 31, 2010 1:26 am
Location: Lancaster
x 6

Re: BX break in

Post by mds141 » Mon Feb 18, 2013 8:10 pm

/\ Seconded. Brilliant write up and piccys. =D>
Mark Smith

Is it just me or is everything shit?

1989 BX GTi 16 valve. Blanc Alpine. Completed the Citroen Classic Challenge Ecosse and 1337 miles without a hitch.
2000 XM VSX 2.1 td Auto. Rouge Magenta.
TGD saloon many years ago.

1990 Swift 'Corniche' 12/2 aka BXClub HQ.
Honda Firestorm. Gone, but not forgotten.
2015 Triumph Tiger Explorer XC.

User avatar
Paul296
Over 2k
Posts: 3483
Joined: Wed Nov 03, 2010 10:39 pm
Location: Newark Nottinghamshire
My Cars: Citroen BX 17 TZD Hurricane
Citroen BX 17 TGD

Re: BX break in

Post by Paul296 » Mon Feb 18, 2013 8:31 pm

mds141 wrote:/\ Seconded. Brilliant write up and piccys. =D>
Ditto! It's an absolute pig getting those things in and out. =D>

User avatar
MULLEY
Over 2k
Posts: 8375
Joined: Thu Jun 22, 2006 11:10 pm
Location: Derbyshire
x 3

Re: BX break in

Post by MULLEY » Mon Feb 18, 2013 10:16 pm

Can this be made into a sticky?
2002 C5 2.0 HDI Estate - Remapped - It goes better
2011 Mini Cooper D Clubman - it does over 60mpg
1992 TZD Turbo - SORN - slowly getting there
1991 Gti 16V - Blaze is back on the road since 2008
1990 Gti 8Valve SOLD - looks like it's been scrapped
2002 Mini Cooper S - SOLD - i miss this car
1992 TXD - Scrapped in March 2014

I'm not just a username, i'm also called Matthew.

User avatar
Phil Peters
Confirmed BX'er
Posts: 46
Joined: Sun Feb 03, 2013 7:15 pm
Location: Warwickshire, UK

Re: BX break in

Post by Phil Peters » Mon Feb 18, 2013 10:45 pm

If the moderators think the write-up bit is up to scratch, then by all means copy and paste it into a sticky or a how-to :D

1992 BX19 TGD (aka Maurice), N/A diesel, silver with Zenith trim.

User avatar
mat_fenwick
Moderator
Posts: 7265
Joined: Tue Sep 20, 2005 4:08 pm
Location: North Wales
x 13

Re: Replacing rear quarterlight

Post by mat_fenwick » Tue Feb 19, 2013 12:16 am

Consider it done!
Image

1993 1.9 TZD Turbo Estate
2006 Renault Kangoo
1996 3.9 V8 Discovery
1993 VW LT35 campervan
1985 Hyundai Stellar V8
2004 MINI Cooper (hers)

Defender110
Over 2k
Posts: 5861
Joined: Wed Dec 16, 2009 8:02 pm
Location: Radcliffe, Gt.Manchester
x 19

Re: Replacing rear quarterlight

Post by Defender110 » Tue Feb 19, 2013 10:18 am

Excellent thank you, what type of biscuits do you recommend for completion of the job, surely they must be of the chocolate variety?
Kevan
1987 Citroen BX MK1 diesel estate.
1997 Mercedes C230 W202 - daily driver.
2010 BMW X1 SE 2.0D Auto - Her indoors daily driver.
2003 Land Rover Discovery TD5 - hobby days and camping.
1993 Land Rover Discovery 300tdi 3 door - in need of TLC

Konrad5
New Member
Posts: 1
Joined: Sat Jan 04, 2014 11:02 am

Re: Replacing rear quarterlight

Post by Konrad5 » Tue Jan 07, 2014 9:29 am

Thanks for sharing information.