After changing a lower ball joint and passing the Mot with a bit of help (Many thanks Ken)
i've now got another problem
when i accelerate the gear stick starts to vibrate badly if keep my foot down the whole car shakes
i haven't had a look yet but could it be the bearing that supports the long driveshaft
(it was the offside ball joint that i swapped)
anyone else had the same problem
Big vibrations
-
- BXpert
- Posts: 314
- Joined: Tue Nov 15, 2005 7:25 pm
- Location: West Yorks
Big vibrations
Citroen BX
Origami in plastic and steel
^^bx>
Origami in plastic and steel
^^bx>
whilst unscrewing the lower swivle joint you probably pulled the intermediate drive shaft triac out of its cup, and one or more triac bearing droped off inside the gaitor,
or you have bent the outter section of the drive shaft
regards malcolm
or you have bent the outter section of the drive shaft
regards malcolm
curent ride
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
-
- BXpert
- Posts: 314
- Joined: Tue Nov 15, 2005 7:25 pm
- Location: West Yorks