Original O-rings 96995632 - like sphere type but smaller

BX Tech talk
Post Reply
User avatar
DLM
Our Trim Guru
Posts: 1620
Joined: Mon May 16, 2005 6:41 pm
Location: Gosport, Hampshire, UK
My Cars: Historically, lots of BX hatches/estates in the 90s/00s - 16/19i/17td/19d
Recent scruffy diesel n/a estate - "The Red Shed" - is no longer mine.
x 9

Original O-rings 96995632 - like sphere type but smaller

Post by DLM »

Have had some of these knocking around for a while - can anyone ID them from Citroen part number 96995632 ? This was on an envelope they were being stored in.

They're like sphere O-rings (square cross-section) and appear to be for hydraulic usage but are slightly smaller in diameter than the sphere o-ring.

Will pop a measurement on later if it helps.
Back on two wheels and pedal power for the moment.
Top
mountainmanUK

Post by mountainmanUK »

Hi David!

According to the Cit website, what you have there is...

96 995 632 PISTON SEAL REAR BRAKE CALIPER NFP

There ya go :wink:
Top
User avatar
DLM
Our Trim Guru
Posts: 1620
Joined: Mon May 16, 2005 6:41 pm
Location: Gosport, Hampshire, UK
My Cars: Historically, lots of BX hatches/estates in the 90s/00s - 16/19i/17td/19d
Recent scruffy diesel n/a estate - "The Red Shed" - is no longer mine.
x 9

Post by DLM »

Aha! (as Alan Partridge might say). Many thanks - knew it had to be something fairly obvious.....

Might try another later.
Back on two wheels and pedal power for the moment.
Top
Post Reply

Return to “BX Technical”