Floppy mirror

Dollywobbler · Post by **Dollywobbler** » Thu Sep 03, 2009 8:20 pm

Howdy

New BX has a floppy mirror on the passenger side. Is it possible to tighten something up in there? There's very little resistence, so my first time getting up to speed will undoubtedly just push the mirror back in again.

Ta

Post by **Tim Leech** » Thu Sep 03, 2009 9:19 pm

New ones are quite cheap mate and easy to fit once you have the door panel off, if its gone floppy its possibly been thwacked and has busted inside.

Dollywobbler · Post by **Dollywobbler** » Thu Sep 03, 2009 9:35 pm

Ah, cool. Swapsies the way to go then.

Post by **Tim Leech** » Fri Sep 04, 2009 11:16 am

Ive got a new one I was keeping as a spare which you can have for what I gave for it buddy if you struggle to find one ysed etc, its not a genuine one but its fine.

cauchoiskev · Post by **cauchoiskev** » Sat Sep 05, 2009 7:52 pm

As I remember there is a nut inside which adjusts the tightness. You have to take the door card off to get the mirror off though, a pain.

Dollywobbler · Post by **Dollywobbler** » Sun Sep 06, 2009 12:41 pm

Thanks. I seem to have got it holding position now, so I'll see how it goes...