Injection or carb?

BX Tech talk
User avatar
cavmad
Keeper of the site Goat
Posts: 7858
Joined: Fri May 20, 2005 9:13 am

Injection or carb?

Post by cavmad » Mon Dec 19, 2005 5:14 pm

Excusing my dimness is this engine injection or carb (it`s a 405 1.6 petrol) and would it go straight into my BX16 (carb) please? Thanks,


EDIT! Forgot to add the picture!


http://cgi.ebay.co.uk/1993-PEUGEOT-405- ... dZViewItem
Last edited by cavmad on Mon Dec 19, 2005 5:42 pm, edited 1 time in total.
Vauxhall apologist.

User avatar
DLM
Our Trim Guru
Posts: 1569
Joined: Mon May 16, 2005 6:41 pm
Location: Gosport, Hampshire, UK
My Cars: None since the last BX.
x 1

Post by DLM » Mon Dec 19, 2005 5:17 pm

Depends on when it was made. The 405 and BX engines are the same XU5- except maybe the carb-fed 405 engines had Weber carbs, if I remember correctly. After 92 or thereabouts, they HAD to be injection.
Relying on two wheels and musclepower since the last BX (or any car) had to go.

User avatar
DavidRutherford
BX Digit man!
Posts: 2704
Joined: Wed May 18, 2005 5:07 pm
Location: Placing comments on YouTube.

Post by DavidRutherford » Mon Dec 19, 2005 7:36 pm

That's up to silly money already. £150 for a 1.6 petrol 405 saloon is about £100 too much. Granted, a late 405 TD estate is still worth several hundred £, but a low-spec petrol saloon is worth nothing.

I'd keep looking for something a whole load cheaper!

PS... Cavmad... did you get my pm about the cav bits?
this might be a signature