Back end comes up normally, front end stays on the floor.
If I sit in the pit under the acr and poke the control arm to the front height corrector, the front goes up nicely.
I have lubricated the linkages, but this does not seem to have helped.
The HC is quite inaccessable, so I don't want to replace it if it has not failed.
Any ideas?
Thanks,
Mike
My BX can't get its front up/ sticky Height Corrector?
- Mike E (uk)
- 1K Away
- Posts: 1115
- Joined: Sun Aug 14, 2005 9:10 am
- Location: High Wycombe, Bucks
- x 1
My BX can't get its front up/ sticky Height Corrector?
la BX 16 soupapes: sachez apprecier avec moderation.
It might be clever now, but it won't be in the morning!
It might be clever now, but it won't be in the morning!
try more lube and work the manual high adjuster, maybe you have not hit the spot with your lube, it is usualy the linkage sticking,
dont use the W stuff as it dry's things out to cause you to use more (crap!!!!)
the actual H/C very seldom give trouble, and even when they do a good strip down and clean usualy fix's them,
regards malcolm
dont use the W stuff as it dry's things out to cause you to use more (crap!!!!)
the actual H/C very seldom give trouble, and even when they do a good strip down and clean usualy fix's them,
regards malcolm
curent ride
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)