Hi
Now that Pleiades don't sell them,
As per a post on the CCC Forum
Re: Pipe flaring tool
Hi Everyone,
Good news I have got a flaring tool from AUTOMEC.
http://www.automec.co.uk
Tel 01280 822 818
Universal light 3.5mm only £126 inc p&p.
You can also buy other formers for different sizes as and when needed
Plus they also sell pipe and fittings
I found this tool to be very good and so simple to use
It's a bit bulky for in situ work @ 180mm x 95mm x 86mm with a 290mm double handle.
I even managed to repair the pipe in situ although it is supposed to be mounted in a vice/workmate you can hold it in one hand and form the joint.
I think for some this might be of interest.
Where to get a new pipe flaring tool
- Philip Chidlow
- Over 2k
- Posts: 11594
- Joined: Fri Oct 07, 2005 1:08 pm
- Location: Chelmsford, Essex
- x 25
Where to get a new pipe flaring tool
• 1992 Citroen BX TZD Turbo Hurricane
• 2006 Xsara Picasso 1.6 16v
• 2006 Xsara Picasso 1.6 16v
-
- BXpert
- Posts: 466
- Joined: Sun Mar 28, 2010 9:02 pm
- Location: Gloucester
- Philip Chidlow
- Over 2k
- Posts: 11594
- Joined: Fri Oct 07, 2005 1:08 pm
- Location: Chelmsford, Essex
- x 25
Thanks, that's very generous.
I was posting the information more as a general note for those who would either prefer to have their own or to borrow one would be logistically tricky.
I'm sure we'll be taking you up on your offer, as the GS project gets under way in earnest...
I was posting the information more as a general note for those who would either prefer to have their own or to borrow one would be logistically tricky.
I'm sure we'll be taking you up on your offer, as the GS project gets under way in earnest...
• 1992 Citroen BX TZD Turbo Hurricane
• 2006 Xsara Picasso 1.6 16v
• 2006 Xsara Picasso 1.6 16v