TZD hp pump adjustment

mikesg · Post by **mikesg** » Sun Mar 11, 2012 9:59 am

Hi all. I need to adjust the belt on my tzd hp pump. Could somebody tell me what size spanners I need please?
Thanks
Mike

ritmo · Post by **ritmo** » Sun Mar 11, 2012 1:21 pm

Not sure of the spanner sizes, seem to remember it being a 12 or 14, but just a quick pointer. When I did mine a while back I was told to put the belt on really tight, so I did. However, it lasted about 3 miles. Don't do it up too tight! I think you should be able to twist the belt to 90°, that's worked for me for the past couple of years anyway.

citronut · Post by **citronut** » Sun Mar 11, 2012 6:56 pm

an 11mm spanner for the slider nut and 14mm for the pivot bolt,

they do need to be very tight or the belt will slip,

regards malcolm

mikesg · Post by **mikesg** » Mon Mar 12, 2012 6:06 pm

Thanks for your input gents
Mike.