Hello
OSR suspension cylinder drips a little LHM, but only when it's in the high setting.
Likely cause? & is this some 'orrible thing that's only going to get worse?
Thanks, as always.
Weeping on high
-
- BXpert
- Posts: 582
- Joined: Tue Aug 15, 2006 11:15 am
- Location: East London
- My Cars: 1991 Citroen BX 16v
- x 26
Weeping on high
1991 Citroen BX 16v
Re: Weeping on high
depends exactly were the drip is from, if the gaitor/boot the pressure seals might be getting a bit old now,
if from the point the cylinder sits in the sub frame, then its alloy worm eating its way through the cylinder body,
i keep thinking of having dead cylinders alloy welded were the corrosion eats its way through,
there are some on here who have modified Xant cylinders to fit the BX,
regards malcolm
if from the point the cylinder sits in the sub frame, then its alloy worm eating its way through the cylinder body,
i keep thinking of having dead cylinders alloy welded were the corrosion eats its way through,
there are some on here who have modified Xant cylinders to fit the BX,
regards malcolm
curent ride
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
Re: Weeping on high
citronut wrote:depends exactly were the drip is from, if the gaitor/boot the pressure seals might be getting a bit old now,
if from the point the cylinder sits in the sub frame, then its alloy worm eating its way through the cylinder body,
i keep thinking of having dead cylinders alloy welded were the corrosion eats its way through,
there are some on here who have modified Xant cylinders to fit the BX,
regards malcolm
See this THIS thread for more info !
Also there's a used one on E-BAY
Good luck !
-
- BXpert
- Posts: 582
- Joined: Tue Aug 15, 2006 11:15 am
- Location: East London
- My Cars: 1991 Citroen BX 16v
- x 26
Re: Weeping on high
Thanks - I will have a better look at the source. Does the fact that it only happens when on the high setting help to narrow it down at all?
1991 Citroen BX 16v
- citsncycles
- Over 2k
- Posts: 3224
- Joined: Sun Aug 08, 2010 9:14 pm
- Location: Dursley, Gloucestershire
Re: Weeping on high
Not really I'm afraid - it could be moving the piston seal past the corrosion on the cylinder, or it could be pushing the fluid past the seals on high due to the higher fluid pressure in the system at this setting.
Mike Sims
BX 19RD Estate Mk1 - Timex!
BX 4X4 Estate - Oh god, I've done it again!
BX 17RD MK1 - it called to me!
BX14 TGE, - SOLD
XM Turbo SD,GS Club Estate,Visa 17D Leader,HY Pickup,Dyane Nomad,Dyane 6,2CV AZL,Falcon S,Trabant P50,3x Land Rovers (88" series 1,109" series 2a FFR,series 2a Marshall ambulance),DKW F7, Lambretta LD150 x 1.5,Mobylette SP93,Ural Cossack,Ural M63,CZ 250 Sport,Honda Varadero 125,lots of bicycles & tricycles including (but not only) Sunbeams,Higgins & Bates!
BX 19RD Estate Mk1 - Timex!
BX 4X4 Estate - Oh god, I've done it again!
BX 17RD MK1 - it called to me!
BX14 TGE, - SOLD
XM Turbo SD,GS Club Estate,Visa 17D Leader,HY Pickup,Dyane Nomad,Dyane 6,2CV AZL,Falcon S,Trabant P50,3x Land Rovers (88" series 1,109" series 2a FFR,series 2a Marshall ambulance),DKW F7, Lambretta LD150 x 1.5,Mobylette SP93,Ural Cossack,Ural M63,CZ 250 Sport,Honda Varadero 125,lots of bicycles & tricycles including (but not only) Sunbeams,Higgins & Bates!