Replacement of a nearside door mirror unit

BX Tech talk
Post Reply
rogermelling
New Member
Posts: 2
Joined: Thu Sep 13, 2012 5:33 pm

Replacement of a nearside door mirror unit

Post by rogermelling »

Can anyone help with this job?
Kitch
Over 2k
Posts: 6417
Joined: Sun Jul 03, 2005 9:36 pm
Location: Fareham, Hants
My Cars: Too many to list
x 88
Contact:

Re: Replacement of a nearside door mirror unit

Post by Kitch »

Possibly one of the easiest things you can do. Doorcard off (on a mk2), undo the screws and wires (if fitted), and remove mirror. 30min job if you take your time.
One third of a three-spoke BX columnist team for the Citroenian magazine.

CCC BX registrar: The national BX register - click to submit a car!

1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
rogermelling
New Member
Posts: 2
Joined: Thu Sep 13, 2012 5:33 pm

Re: Replacement of a nearside door mirror unit

Post by rogermelling »

Many thanks Kitch. By 'doorcard' do you mean the whole of the door lining? or just the 11/2 inch black plastic disc. I have had that disc off but the screws do not seem very accessible. Sorry for my ignorance.
mds141
Over 2k
Posts: 5288
Joined: Sat Jul 31, 2010 1:26 am
Location: Lancaster
x 9

Re: Replacement of a nearside door mirror unit

Post by mds141 »

The door card is the whole of the interior side of the door. Remove speaker grille and remove speaker, two torx screws under the armrest and then remove the door locking button/ knob on the top of the door card. Run your fingers along the edge of the door card to locate the plastic clips that hold it onto the door frame and pull away, then lift up the door card. The mirror is held on with two further screws. Reverse the process and job done.
Mark Smith

Is it just me or is everything shit?

1989 BX GTi 16 valve. Blanc Alpine. Completed the Citroen Classic Challenge Ecosse and 1337 miles without a hitch.
2000 XM VSX 2.1 td Auto. Rouge Magenta.
TGD saloon many years ago.

1990 Swift 'Corniche' 12/2 aka BXClub HQ.
Honda Firestorm. Gone, but not forgotten.
2015 Triumph Tiger Explorer XC.
Tinkley
1K Away
Posts: 1502
Joined: Sat Jun 06, 2009 11:27 am
Location: N Hants England
x 8

Re: Replacement of a nearside door mirror unit

Post by Tinkley »

mds141 wrote:The door card is the whole of the interior side of the door. Remove speaker grille and remove speaker, two torx screws under the armrest and then remove the door locking button/ knob on the top of the door card. Run your fingers along the edge of the door card to locate the plastic clips that hold it onto the door frame and pull away, then lift up the door card. The mirror is held on with two further screws. Reverse the process and job done.
With due respect to mds141...

Actually you don't need to remove the speaker, just leave it in the card. There are two torx under the speaker grille though and one high up near the mirror. There are THREE torx holding the door handle and these are angled, make sure you align correctly on replacement. You may need to jiggle it a bit to get it to sit over the door opening lever moulding. Also just watch the wiring routing when replacing the card around the speaker area so it all tucks in sweetly. You may need to press the card quite firmly to the window glass at the top of the card, to get it to sit properly and align over the door plunger. and sit correctly for the 'fir tree' receptor holes.

The mirror stalk brush part can also be made to pop of if needed as you will see.
Post Reply