rear height corrector

BX Tech talk
Post Reply
tom
Citroen Sorceror
Posts: 1266
Joined: Fri May 20, 2005 8:51 pm
Location: straddling the channel
My Cars: 2003- Passe-Partout 1.9 TGD estate
2005 Grolliffe Tizzydee turbo estate and sundry other BXs and Grace, a CX TRD.
2008 to 2023 - all sorts of stuff, some interesting
2024. TxD 1.9D estate. 'Wheelybin'
x 12

rear height corrector

Post by tom »

Does the BX one match that of the Xantia?
Top
jeremy
Over 2k
Posts: 2112
Joined: Fri Jul 01, 2005 2:58 am
Location: Hampshire UK

Post by jeremy »

Linkage is different as Xantias have plastic link. I don't know if all this comes off to leave the same component.

Jeremy
Top
User avatar
Vanny
Merseyside resident
Posts: 3583
Joined: Tue May 17, 2005 11:48 pm
Location: BXProject
My Cars: BX 16v Ph2 - Jazz
BX 16v Ph2 - XPO
x 82
Contact:
Contact Vanny

Post by Vanny »

i thought the link on the Xantia was only an intermediary link? the ball joint on the corrector is still the same witht he plastic pivot bit between the control rod and the HC. as i understand it, the reason for this arrangement is so that BX HC can be used! That said i seem to think the part numbers ARE different!
Top
Post Reply

Return to “BX Technical”