Pumps

BX Tech talk
OwenS
BXpert
BXpert
Posts: 216
Joined: Fri May 20, 2005 7:36 pm
Location: Abergavenny, South Wales.

Pumps

Post by OwenS » Wed Jan 17, 2007 11:36 am

Would the BX16 hydraulic pump fit a BX14 or would I have to get hold of a BX14 tu pump? Anyone know decent places to get hold of them?
Cheers guys.
2007 Sportka

Stewart (oily!)
1K Away
1K Away
Posts: 1604
Joined: Wed May 18, 2005 6:23 pm
Location: North Wales

Post by Stewart (oily!) » Wed Jan 17, 2007 5:22 pm

I suggest you look in the GSF catalogue and compare part numbers, I have a GTI8 valve one in the garage if it will fit?
Stewart
TZD 19 TD one of the few
Xantia Td estate, going soft

OwenS
BXpert
BXpert
Posts: 216
Joined: Fri May 20, 2005 7:36 pm
Location: Abergavenny, South Wales.

Post by OwenS » Wed Jan 17, 2007 5:46 pm

Thank you Stewart, good advice. I will check the part numbers.
2007 Sportka

User avatar
DLM
Our Trim Guru
Posts: 1569
Joined: Mon May 16, 2005 6:41 pm
Location: Gosport, Hampshire, UK
My Cars: None since the last BX.
x 1

Post by DLM » Wed Jan 17, 2007 6:37 pm

I suspect the 16 pump might fit, but the most impotant things are the pulley diameter (different on some models, I think) and the fittings for the pump. If either of these is very different, you might have a problem.
Relying on two wheels and musclepower since the last BX (or any car) had to go.

User avatar
djoptix
BXpert
BXpert
Posts: 890
Joined: Fri Oct 28, 2005 12:48 pm
Location: Bristolcestershire
x 2

Post by djoptix » Wed Jan 17, 2007 7:24 pm

OwenS, I think I remember you posting a while ago about a BX14 for sale, have you still got it?

OwenS
BXpert
BXpert
Posts: 216
Joined: Fri May 20, 2005 7:36 pm
Location: Abergavenny, South Wales.

Post by OwenS » Thu Jan 18, 2007 5:15 pm

Sure have, sadly not in saleable condition any more, no mot, needs rear arms and bust hydraulic pump.
2007 Sportka

User avatar
djoptix
BXpert
BXpert
Posts: 890
Joined: Fri Oct 28, 2005 12:48 pm
Location: Bristolcestershire
x 2

Post by djoptix » Fri Jan 19, 2007 9:19 pm

Interesting. Looking for a project 1.4, if I have cash. How much? TBH probably couldn't afford more than scrap value :( sorry if that sounds like taking the p*ss but we're all in the same boat eh...