Coolant Bleed Points

BX Tech talk
Post Reply
User avatar
Ian_Fearn
Spender lotta cash on Citroens
Posts: 2231
Joined: Fri Jun 03, 2005 9:51 pm
Location: Derbyshire

Coolant Bleed Points

Post by Ian_Fearn »

According to Haynes theres only 2 bleeds points on the TD engine. 1 on the rad and 1 on the thermostat housing. Is this correct?
Over and out from me
Top
User avatar
AndersDK
BXpert
Posts: 537
Joined: Sat Jul 23, 2005 4:41 pm
Location: Denmark West
x 1

Post by AndersDK »

Not seen any other on mine.

With cold engine top up ccolant and bleed at the 2 points until coolant starts flowing out. Note that the coolant must be at top level on radiator, while expansion tank should be 1/2 level at cold.
C U / Anders - '90red16riBreak - '91GrisDolment16meteor - Project'88red19trsBreak
dead cars : '89white 16RS - '89antrasitTRDturboEst - '90white19triBreak
Top
User avatar
Ian_Fearn
Spender lotta cash on Citroens
Posts: 2231
Joined: Fri Jun 03, 2005 9:51 pm
Location: Derbyshire

Post by Ian_Fearn »

Thanks
Over and out from me
Top
Post Reply

Return to “BX Technical”