what style of screw holds the plastic around the steering column on my bx 19TZS auto? I need to remove it to fit hand controls. Today I tried a selection of screw drivers with no luck
Charlotte001
another of my famous questions steering column casing screw
I've used a number of cheap torx bits on Citroen trim and never had any rounding problems - I accept that if I used them in tight bolts into steel then things might be a bit different.
The problem with the trim under the steering column is finding the screw head - and sometimes the screws are missing - so you wonder why you can't get the thing to undo! A small mirror and a torch can be very handy!
There are 2 posidrive 2 (X type) screws on the panel immediately behind the steering wheel - they must be removed before the bottom column cover can be removed. (I did the job yesterday)
The problem with the trim under the steering column is finding the screw head - and sometimes the screws are missing - so you wonder why you can't get the thing to undo! A small mirror and a torch can be very handy!
There are 2 posidrive 2 (X type) screws on the panel immediately behind the steering wheel - they must be removed before the bottom column cover can be removed. (I did the job yesterday)