Has anyone ever come across repair panels for the rear end of the BX estate?
Mine has gone behind the side part of the bumper on the passenger side and does look unsightly, but it's only thin tin so welding it up may be more difficult than it's worth?? Problem seems to be that it's the whole rear 1/4 panel that will need to be replaced???
Any ideas appreciated,
Cheers Steve
BX TZD Estate rear arch repair panels????
-
- Confirmed BX'er
- Posts: 91
- Joined: Fri Feb 24, 2006 3:20 pm
- docchevron
- The Immoderate half of the admin team
- Posts: 7524
- Joined: Sun Jun 04, 2006 7:03 pm
- Location: A Bucket of Fish
- x 7
- Contact:
Repair panels were available years ago, but where you'd find one now I have no idea.
Complete wings are available, even form Citroen, but you'd need to remortgage your house to get one.
Classic Citroen Parts have a really good stock of BX panels though, and he's reasonably priced, and a very nice bloke.
Complete wings are available, even form Citroen, but you'd need to remortgage your house to get one.
Classic Citroen Parts have a really good stock of BX panels though, and he's reasonably priced, and a very nice bloke.
Smokes lots, because enough's enough already!
Far too many BX's, a bus, an ambulance a few trucks, not enough time and never enough cash...
Far too many BX's, a bus, an ambulance a few trucks, not enough time and never enough cash...
- kermit the frog
- BXpert
- Posts: 673
- Joined: Mon Aug 13, 2007 10:36 am
- Location: WORTHING WEST SUSSEX
Hi Talbotsteve
Check out Jeremy's post on the 19th of april.
reference to www.beaverautopanels.co.uk
Regards Kermit
Check out Jeremy's post on the 19th of april.
reference to www.beaverautopanels.co.uk
Regards Kermit
ALAN S an oracle of knowledge sadly missed by us all RIP Mate
Green Hornet well I don't really know.GS project gone to pastures new
Blue Streak 1996(P) XANTIA VSX TD (130K.)
Green Hornet well I don't really know.GS project gone to pastures new
Blue Streak 1996(P) XANTIA VSX TD (130K.)
-
- Confirmed BX'er
- Posts: 91
- Joined: Fri Feb 24, 2006 3:20 pm
The problem is the hole is starting to come around up onto the main part of the rear quater so any "repair" would be very noticable, plus its very thin metal so not sure how easy it would repair????
Thanks for the replies guys i'll take a look at the afore mentioned supplier and see what they have.
Cheers Steve
Thanks for the replies guys i'll take a look at the afore mentioned supplier and see what they have.
Cheers Steve
-
- Confirmed BX'er
- Posts: 91
- Joined: Fri Feb 24, 2006 3:20 pm