For sale black TZD 1.7 td now sold now on ebay

toddao · Post by **toddao** » Fri Jul 08, 2011 9:56 am

I bought my yellow break off a guy whose two favourite tools were a can of silver spray ( makes everything new innit?) and a can of WD40. Perhaps a spray could be invented that combines the two?

Anyway, it needed a lot of work but anything sub €500 in my opinion is in the bottom feeder bracket. I think one can't expect much for 300 sheets!

Hopefully the next buyer can deal with the minor fibre glass repair, which curiously isn't mentioned in his ad!

I think typos can be funny though I hadn't considered MX to be XM - I thought that pic was funny and I was swimming in hops at the time anyway..

Mike P · Post by **Mike P** » Fri Jul 08, 2011 11:20 am

Todd,

I have just come back from a work trip to Halle (near Leipzig) and can comment on the hops.

Don't recall the name of the beer but it was white like Hoegarden and was the strength of rocket fuel

By the end of the evening I was sure I was fluent in German

Mike P

toddao · Post by **toddao** » Fri Jul 08, 2011 11:34 am

Sounds like a Weißbier / Weizenbier - white beer/wheat beer. Perhaps it was Paulaner? The Bavarians are famous for these

. But there are many local breweries in Germany.

Post by **Defender110** » Fri Jul 08, 2011 2:23 pm

jacksun1987 wrote:Well i wish you luck on the sale. i just hope the new owner can do more About the bodge job. It was that or spending more mony on the car. You should have seen it before. You could see though the floor. Fiberglass is pretty strong. I think you would peobily get 300 to 350 on it. Max 400. I Spent all of that time and mony on it. I had to give up in the end. I still blame MEDWAY I suppose i saved it. But just needs a bit more doing to it.

So you knew all about the bad rust issues and bodge job but failed to mention this when you where selling it with ''good body work'' Paul??
Shame on you

jacksun1987 · Post by **jacksun1987** » Fri Jul 08, 2011 2:52 pm

Well it is good body work. Compered on other cars that ages. Itss been waxed oiled. Did everything possible to keep it looking good. It was iether looking at fiberglass with p38 on it. Then waxed oil over it. or a hole. Which one would you perfer?

jacksun1987 · Post by **jacksun1987** » Wed Jul 13, 2011 3:42 pm

oooo well mabye should have asked for more. But at least he wonte be pissed off with us. Still got 3 days togo. Might get 400 like i said

scarecrow · Post by **scarecrow** » Wed Jul 13, 2011 6:39 pm

At least he didn't notice it was two cars welded together

:/

jacksun1987 · Post by **jacksun1987** » Wed Jul 13, 2011 8:22 pm

its one car with bumpers from another red bx 1 passenger door and a differnt boot But it still loooks good Just wish my red one looked as good

jacksun1987 · Post by **jacksun1987** » Tue Jul 19, 2011 4:49 pm

WHO GOT IT THEN ?

Post by **Tim Leech** » Tue Jul 19, 2011 4:56 pm

jacksun1987 wrote:its one car with bumpers from another red bx 1 passenger door and a differnt boot But it still loooks good Just wish my red one looked as good

I think with your red one Paul, its rather faded in places then shiny in others which makes it look patchy, a damn good machine polish would make a big difference.

jacksun1987 · Post by **jacksun1987** » Thu Jul 21, 2011 1:35 pm

When i took it to ccc At the weekend i was shocked how good mine was. Compaerd to other red ones.