Alloy Wheel Bolts

Buy or sell parts etc. Please put 'Wanted' in the title if it is a request for parts.
Post Reply
User avatar
Tim Leech
Over 2k
Posts: 15579
Joined: Tue Apr 15, 2008 11:12 am
Location: Derbyshire
My Cars: Various
x 150

Alloy Wheel Bolts

Post by Tim Leech »

Im after a set of wheel bolts please, they are for Mk1 Alloys but I imagine speedlines will fit!

Tim.
Lots of Motors, mostly semi broken....
User avatar
toddao
BXpat
Posts: 2833
Joined: Fri Jan 12, 2007 5:01 pm
Location: The Hegau

Post by toddao »

I got a set from the scrapyard for these alloys - they have to be quite long. The local yard here keeps sets of alloy wheel bolts all nicely bagged up in sets - I had to sift though quite a few in their storeroom then pay €10. Don't know if that's a possibility in the Uk?
( Or you could just go out looting with the rest of the gang tonight!)
Todd


this yellow writing is really hard to read
User avatar
Tim Leech
Over 2k
Posts: 15579
Joined: Tue Apr 15, 2008 11:12 am
Location: Derbyshire
My Cars: Various
x 150

Post by Tim Leech »

Thankfully there is no looting near us, dont get to scaryards as much these days and knowing my luck I would get the wrong sort!
Lots of Motors, mostly semi broken....
User avatar
Tim Leech
Over 2k
Posts: 15579
Joined: Tue Apr 15, 2008 11:12 am
Location: Derbyshire
My Cars: Various
x 150

Post by Tim Leech »

http://www.ebay.co.uk/itm/16-Peugeot-Al ... 336a480721

will these work, they are for Mk1 type wheels.

Thanks!
Lots of Motors, mostly semi broken....
RxBX
Over 2k
Posts: 2241
Joined: Wed Jan 28, 2009 11:51 am
Location: DERBYSHIRE
x 1

Post by RxBX »

Roverman wrote:http://www.ebay.co.uk/itm/16-Peugeot-Al ... 336a480721

will these work, they are for Mk1 type wheels.

Thanks!
Tim,

The Chrome plated type/ones are Pug ones (AS STATED in the AD) and are too short in length for Speed-lines, if the MK1 metric alloy's are the same thickness thro' the hub section as Speed-lines there NOT suitable !

IYCR it's all been covered in THIS thread !

I know you've asked me (At least twice) if I have a spare set, but as you know I've had quite a lot on/problems just lately !

So I'll do a stock check tomorrow to see if I have 16-off available [-o<

.
citronut
Over 2k
Posts: 2781
Joined: Wed Oct 31, 2007 7:55 am
Location: EAST SUSSEX UK
x 1

Post by citronut »

isnt alloy a bit soft for wheel bolts :roll:

and the looting will get to were you live sooner or later :evil: :shock: :lol: :wink:

arnt there any CX's with alloys on in you area as they have 5 bolts to each wheel, you could borrow one from each wheel and the owner would never know :twisted:


regards malcolm
curent ride
K reg BX 17TD TZD est
also own
K reg D special

no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
RxBX
Over 2k
Posts: 2241
Joined: Wed Jan 28, 2009 11:51 am
Location: DERBYSHIRE
x 1

Post by RxBX »

RxBX wrote:...........
So I'll do a stock check tomorrow to see if I have 16-off available [-o<
I have managed to find 16 Speed-line stud-bolts, E-mail sent !

:D

.
User avatar
Tim Leech
Over 2k
Posts: 15579
Joined: Tue Apr 15, 2008 11:12 am
Location: Derbyshire
My Cars: Various
x 150

Post by Tim Leech »

Thanks, do I need to sell one of my organs to buy them though? :wink:
Lots of Motors, mostly semi broken....
scarecrow

Post by scarecrow »

Do you have another 16?
Post Reply