I could probably make something up but do's anyone have a spare bolt/fitting that holds the cylindrical thing the oil filler cap go's into that makes up the breather system on a petrol BX ?
It consists of a stud that screws into the block which has a metal plate welded to it that in turn is bonded to a rubber "cushion" the other side of this is a stud that has a nut on the end that holds the cylinder in place
cylindrical thingy mounting bolt
-
- Over 2k
- Posts: 3209
- Joined: Wed Apr 01, 2009 10:38 pm
- Location: M K
- x 1
cylindrical thingy mounting bolt
1991 BX Meteor 1.6
light travels faster than sound, thats why you look intelligent and then you spoil it all by opening your mouth !!!!!
light travels faster than sound, thats why you look intelligent and then you spoil it all by opening your mouth !!!!!
-
- BXpert
- Posts: 477
- Joined: Mon Aug 22, 2011 11:50 am
- Location: Tonbridge KENT
- My Cars: Citroens SAABs and Vauxhalls
- x 2
Cylindrical thingy mounting bolt.
Dear Mick.
I think you will find Mick, they are called " bobbins ", you should be
able to find some quiet readilly. If you were to go to an exhaust fitting
place, they should be able to match one up for you. although you may
end up having to fit a slightly bigger one, which wouldn,t be a bad thing,
as the original one like on my BX is also struggling to cope with all of the
weight of the oil filler pipe etc. etc. My car still has a piece of string,
trying to help it stay up, until I get round to doing the same for my BX
too Mick. These bobbins are usually 13 mm spanner size, but you can get
them in 10 mm size too
I hope this helps Mick.
All The Best.
Vince.
I think you will find Mick, they are called " bobbins ", you should be
able to find some quiet readilly. If you were to go to an exhaust fitting
place, they should be able to match one up for you. although you may
end up having to fit a slightly bigger one, which wouldn,t be a bad thing,
as the original one like on my BX is also struggling to cope with all of the
weight of the oil filler pipe etc. etc. My car still has a piece of string,
trying to help it stay up, until I get round to doing the same for my BX
too Mick. These bobbins are usually 13 mm spanner size, but you can get
them in 10 mm size too
I hope this helps Mick.
All The Best.
Vince.
Passion Hydropneumatic Citroen,s
Cars;- 1993 White Citroen BX 1.6 TXi petrol
saloon auto with air-con & ABS.
47,594 Miles from new.
Owned for 3 years sorned.
1988 Silver SAAB 900i 2.0 8v F/lift,
saloon 5sp with 3 spoke Ronals,
69,000 Miles from new.
Owned for 15 years T & T.
Cars;- 1993 White Citroen BX 1.6 TXi petrol
saloon auto with air-con & ABS.
47,594 Miles from new.
Owned for 3 years sorned.
1988 Silver SAAB 900i 2.0 8v F/lift,
saloon 5sp with 3 spoke Ronals,
69,000 Miles from new.
Owned for 15 years T & T.
-
- Over 2k
- Posts: 5917
- Joined: Wed Dec 16, 2009 8:02 pm
- Location: Harwood, Bolton
- My Cars: Land Rover Discovery Series 1 200tdi 3 door
Land Rover Discovery Series 2 Facelift TD5
2020 Fiat Panda cross 4x4 twin air. - x 27
I've got loads of bobbins of varying sizes, what size are the studs M6, M8?
EDIT: if they are 13mm spanner size as per Vince's post they will be M8, double check this Mick and i'll stick you one in the post.
EDIT: if they are 13mm spanner size as per Vince's post they will be M8, double check this Mick and i'll stick you one in the post.
Kevan
1997 Mercedes C230 W202
2003 Land Rover Discovery Series 2 Facelift TD5 - Daily driver / hobby days and camping.
1993 Land Rover Discovery 200tdi Series 1 3 door - in need of TLC
2020 Fiat Panda 4x4 Cross Twin Air.
1997 Mercedes C230 W202
2003 Land Rover Discovery Series 2 Facelift TD5 - Daily driver / hobby days and camping.
1993 Land Rover Discovery 200tdi Series 1 3 door - in need of TLC
2020 Fiat Panda 4x4 Cross Twin Air.
here is price and part No. from citroen if they are still available,
Part Number Description Quantity Price excl. VAT Price incl. VAT Total incl. VAT Selection
0000143910 ELASTIC BRACKET 1.29 GBP 1.55 GBP 1.55 GBP
regards malcolm
Part Number Description Quantity Price excl. VAT Price incl. VAT Total incl. VAT Selection
0000143910 ELASTIC BRACKET 1.29 GBP 1.55 GBP 1.55 GBP
regards malcolm
curent ride
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
-
- Over 2k
- Posts: 3209
- Joined: Wed Apr 01, 2009 10:38 pm
- Location: M K
- x 1
thanks guys ,
Will check the size tomorrow Kevan,
I wonder why they chose this design of fitting in the fist place i.e. Why do's it have to have a flexible rubber piece ?
Surely a stud with a thick rubber washer either side of the housing would have been better or even a rubber insert in the hole in the housing.
I think it broke due to overtightening trying to make it stand upright and not crush the pipe underneath it
Will check the size tomorrow Kevan,
I wonder why they chose this design of fitting in the fist place i.e. Why do's it have to have a flexible rubber piece ?
Surely a stud with a thick rubber washer either side of the housing would have been better or even a rubber insert in the hole in the housing.
I think it broke due to overtightening trying to make it stand upright and not crush the pipe underneath it
1991 BX Meteor 1.6
light travels faster than sound, thats why you look intelligent and then you spoil it all by opening your mouth !!!!!
light travels faster than sound, thats why you look intelligent and then you spoil it all by opening your mouth !!!!!
-
- Over 2k
- Posts: 3209
- Joined: Wed Apr 01, 2009 10:38 pm
- Location: M K
- x 1
-
- Over 2k
- Posts: 3209
- Joined: Wed Apr 01, 2009 10:38 pm
- Location: M K
- x 1