Well it is not me Tim
If it was I would have done a swap with you All The Best.
Vince.
Mk2 hatch nsr 1/4 panel
-
bx petrol auto saloon
- BXpert
- Posts: 477
- Joined: Mon Aug 22, 2011 11:50 am
- Location: Tonbridge KENT
- My Cars: Citroens SAABs and Vauxhalls
- x 2
Re: Mk2 hatch nsr 1/4 panel
Dear Tim.
Well it is not me Tim If it was I would have done a swap with you
All The Best.
Vince.
Well it is not me Tim
If it was I would have done a swap with you All The Best.
Vince.
Passion Hydropneumatic Citroen,s
Cars;- 1993 White Citroen BX 1.6 TXi petrol
saloon auto with air-con & ABS.
47,594 Miles from new.
Owned for 3 years sorned.
1988 Silver SAAB 900i 2.0 8v F/lift,
saloon 5sp with 3 spoke Ronals,
69,000 Miles from new.
Owned for 15 years T & T.
Cars;- 1993 White Citroen BX 1.6 TXi petrol
saloon auto with air-con & ABS.
47,594 Miles from new.
Owned for 3 years sorned.
1988 Silver SAAB 900i 2.0 8v F/lift,
saloon 5sp with 3 spoke Ronals,
69,000 Miles from new.
Owned for 15 years T & T.
Re: Mk2 hatch nsr 1/4 panel
it would be easier to cut that out and repair/make a piece up rather than cut the complete wing off and fit a new one,
a lot less work by far
even if you cut a corresponding section from a scraped BX
regards malcolm
a lot less work by far
even if you cut a corresponding section from a scraped BX
regards malcolm
curent ride
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
-
Tim Leech
- Over 2k
- Posts: 15578
- Joined: Tue Apr 15, 2008 11:12 am
- Location: Derbyshire
- My Cars: Various
- x 148
Re: Mk2 hatch nsr 1/4 panel
Just finding someone to do it, if i cant find a new panel i will contact the local restorers who did my bosses moggy,
Lots of Motors, mostly semi broken....
-
Defender110
- Over 2k
- Posts: 5917
- Joined: Wed Dec 16, 2009 8:02 pm
- Location: Harwood, Bolton
- My Cars: Land Rover Discovery Series 1 200tdi 3 door
Land Rover Discovery Series 2 Facelift TD5
2020 Fiat Panda cross 4x4 twin air. - x 27
Re: Mk2 hatch nsr 1/4 panel
I agree with Malcolm, a repair would probably be easier than fitting a complete new wing and very do-able.
Kevan
1997 Mercedes C230 W202
2003 Land Rover Discovery Series 2 Facelift TD5 - Daily driver / hobby days and camping.
1993 Land Rover Discovery 200tdi Series 1 3 door - in need of TLC
2020 Fiat Panda 4x4 Cross Twin Air.
1997 Mercedes C230 W202
2003 Land Rover Discovery Series 2 Facelift TD5 - Daily driver / hobby days and camping.
1993 Land Rover Discovery 200tdi Series 1 3 door - in need of TLC
2020 Fiat Panda 4x4 Cross Twin Air.
Re: Mk2 hatch nsr 1/4 panel
hi Tim,
I have done a check of any panels I have and this is all I could find
But I don't think it will cover what your tin-worm area.
I have done a check of any panels I have and this is all I could find
But I don't think it will cover what your tin-worm area.
Neil
A476 RBX
Series 1 BX 16TRS
+ 2015 C4 Flair (boring compared to BX!)
A476 RBX
Series 1 BX 16TRS
+ 2015 C4 Flair (boring compared to BX!)
-
Tim Leech
- Over 2k
- Posts: 15578
- Joined: Tue Apr 15, 2008 11:12 am
- Location: Derbyshire
- My Cars: Various
- x 148
Re: Mk2 hatch nsr 1/4 panel
Thanks Neil, think im going to opt to get the existing one repaired.
That looks like a Mk2 panel though!
That looks like a Mk2 panel though!
Lots of Motors, mostly semi broken....
Re: Mk2 hatch nsr 1/4 panel
Hi Tim
No that is a mark1 panel, there is no hole drilled and the edge is raised by the distance all the way along.
It does state BX 83-92 but looks identical to my Mk1 BX rear wing
I have just done a check the rear wing on my BX is 95 559434 replaced in Oct-93 and looks the same as the picture wing
No that is a mark1 panel, there is no hole drilled and the edge is raised by the distance all the way along.
It does state BX 83-92 but looks identical to my Mk1 BX rear wing
I have just done a check the rear wing on my BX is 95 559434 replaced in Oct-93 and looks the same as the picture wing
Neil
A476 RBX
Series 1 BX 16TRS
+ 2015 C4 Flair (boring compared to BX!)
A476 RBX
Series 1 BX 16TRS
+ 2015 C4 Flair (boring compared to BX!)
-
Tim Leech
- Over 2k
- Posts: 15578
- Joined: Tue Apr 15, 2008 11:12 am
- Location: Derbyshire
- My Cars: Various
- x 148
Re: Mk2 hatch nsr 1/4 panel
Ok neil. Heading to a local body restorers tomorrow to sound them out.
Lots of Motors, mostly semi broken....