Door pins and a filler neck nozzle
-
- Over 2k
- Posts: 6417
- Joined: Sun Jul 03, 2005 9:36 pm
- Location: Fareham, Hants
- My Cars: Too many to list
- x 88
- Contact:
Door pins and a filler neck nozzle
Where do we go for door hinge pins these days? Stealer? Or some specialist?
Also.....the nozzle behind the filler flap on the top of the filler neck on G-SEG is no longer a nozzle. It's now a piece of ornamental rust on the floor. New neck time, or can I just change the nozzle? Let me know what you got!
Also.....the nozzle behind the filler flap on the top of the filler neck on G-SEG is no longer a nozzle. It's now a piece of ornamental rust on the floor. New neck time, or can I just change the nozzle? Let me know what you got!
One third of a three-spoke BX columnist team for the Citroenian magazine.
CCC BX registrar: The national BX register - click to submit a car!
1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
CCC BX registrar: The national BX register - click to submit a car!
1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
Re: Door pins and a filler neck nozzle
here is a list of models the BX hinge pin fits
Number of documents found by vehicle family:
2 document(s) found for BX
6 document(s) found for AX
1 document(s) found for C15
and here is price and part No. if they are still available
Part Number Description Quantity Price excl. VAT Price incl. VAT Total incl. VAT Selection
00006999CJ HINGE SHAFT 1.75 GBP 2.10 GBP 2.10 GBP
regards malcolm
Number of documents found by vehicle family:
2 document(s) found for BX
6 document(s) found for AX
1 document(s) found for C15
and here is price and part No. if they are still available
Part Number Description Quantity Price excl. VAT Price incl. VAT Total incl. VAT Selection
00006999CJ HINGE SHAFT 1.75 GBP 2.10 GBP 2.10 GBP
regards malcolm
curent ride
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
-
- Over 2k
- Posts: 5917
- Joined: Wed Dec 16, 2009 8:02 pm
- Location: Harwood, Bolton
- My Cars: Land Rover Discovery Series 1 200tdi 3 door
Land Rover Discovery Series 2 Facelift TD5
2020 Fiat Panda cross 4x4 twin air. - x 27
Re: Door pins and a filler neck nozzle
Door pins are just a standard rolll pin available from any good Iron mongers supplies.
Kevan
1997 Mercedes C230 W202
2003 Land Rover Discovery Series 2 Facelift TD5 - Daily driver / hobby days and camping.
1993 Land Rover Discovery 200tdi Series 1 3 door - in need of TLC
2020 Fiat Panda 4x4 Cross Twin Air.
1997 Mercedes C230 W202
2003 Land Rover Discovery Series 2 Facelift TD5 - Daily driver / hobby days and camping.
1993 Land Rover Discovery 200tdi Series 1 3 door - in need of TLC
2020 Fiat Panda 4x4 Cross Twin Air.
- Tim Leech
- Over 2k
- Posts: 15579
- Joined: Tue Apr 15, 2008 11:12 am
- Location: Derbyshire
- My Cars: Various
- x 150
Re: Door pins and a filler neck nozzle
I bought some a few months ago from Citroen, standard roll pin they are but i found the ones i got elsewhere were to wide and didnt fit.
Lots of Motors, mostly semi broken....
- Mike E (uk)
- 1K Away
- Posts: 1115
- Joined: Sun Aug 14, 2005 9:10 am
- Location: High Wycombe, Bucks
- x 1
Re: Door pins and a filler neck nozzle
I have some of these knocking about in the garage.
Will try to find them at the weekend.
Mike
Will try to find them at the weekend.
Mike
la BX 16 soupapes: sachez apprecier avec moderation.
It might be clever now, but it won't be in the morning!
It might be clever now, but it won't be in the morning!
-
- Over 2k
- Posts: 6417
- Joined: Sun Jul 03, 2005 9:36 pm
- Location: Fareham, Hants
- My Cars: Too many to list
- x 88
- Contact:
Re: Door pins and a filler neck nozzle
Ah they're just standard roll pins I think we've got a box of them here somewhere. Will look!
Filler nozzle is the one I've worrying about
Filler nozzle is the one I've worrying about
One third of a three-spoke BX columnist team for the Citroenian magazine.
CCC BX registrar: The national BX register - click to submit a car!
1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
CCC BX registrar: The national BX register - click to submit a car!
1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
-
- Over 2k
- Posts: 3940
- Joined: Sun Dec 04, 2005 2:25 pm
- Location: Wales
- Contact:
Re: Door pins and a filler neck nozzle
Anyone know how similar a diesel estate nozzle would be? As Mat mentioned on FB, mine has become a breaker.
-
- Over 2k
- Posts: 3209
- Joined: Wed Apr 01, 2009 10:38 pm
- Location: M K
- x 1
Re: Door pins and a filler neck nozzle
Where has your filler neck gone Hitch, I think U may have a similar problem with mine the three screws under the flap that hold. The neck have come loose and won't retighten, the top edge of the neck seems to be coming away from the neck itself
1991 BX Meteor 1.6
light travels faster than sound, thats why you look intelligent and then you spoil it all by opening your mouth !!!!!
light travels faster than sound, thats why you look intelligent and then you spoil it all by opening your mouth !!!!!
- JayW
- 1K Away
- Posts: 1590
- Joined: Thu Dec 07, 2006 6:40 pm
- Location: Now listen here you mullet...
- x 13
Re: Door pins and a filler neck nozzle
There are 2 types of filler neck. One is fitted to the cars with the extra tank inside the o/s rear wing (16V/GTi/TZD etc). The second is for the cars without the extra tank.
Splitting the bayonet fron the plastic to swap between the two is "almost" impossible without it bending/crumbling.
Splitting the bayonet fron the plastic to swap between the two is "almost" impossible without it bending/crumbling.
I have zero patience for your tedium.
- Philip Chidlow
- Over 2k
- Posts: 11594
- Joined: Fri Oct 07, 2005 1:08 pm
- Location: Chelmsford, Essex
- x 25
Re: Door pins and a filler neck nozzle
Is it an option to swap the tank to suit whichever neck you can find?
• 1992 Citroen BX TZD Turbo Hurricane
• 2006 Xsara Picasso 1.6 16v
• 2006 Xsara Picasso 1.6 16v
-
- Over 2k
- Posts: 3940
- Joined: Sun Dec 04, 2005 2:25 pm
- Location: Wales
- Contact:
Re: Door pins and a filler neck nozzle
Ah. My TGD doesn't have the extra tank.
Mickey - I used some slightly thicker screws on the Green Tiger as the filler was loose. Did the job an absolute treat!
Mickey - I used some slightly thicker screws on the Green Tiger as the filler was loose. Did the job an absolute treat!
- MULLEY
- Over 2k
- Posts: 8406
- Joined: Thu Jun 22, 2006 11:10 pm
- Location: Derbyshire
- My Cars: 1999 Xsara LX 2.0HDI (90) Hatch - Fern
2002 C5 2.0 HDI (110) Estate - Jasmine - SORN
2011 Mini Cooper D Clubman - SOLD
2016 Mercedes A180D Sport - Auto refinement
1992 TZD Turbo - Bluebell - SORN
1992 TZD Turbo Estate - SORN
1991 Gti 16V - Blaze - crash damaged, will get repaired - SORN
1990 Gti 8Valve SOLD - looks like it's been scrapped
2002 Mini Cooper S - SOLD - i miss this car
1992 TXD - Scrapped in March 2014
1988 CX 25 GTI Turbo2 - SORN
1996 - AX Memphis 1.5D - Dream - SORN - x 8
Re: Door pins and a filler neck nozzle
On my old Gti the filler neck metal surround started to crumble, the garage used some black mastic stuff to keep it all held together, it soldiered on for quite a while like that & as far as i'm aware is still working fine. But ideally, a replacement is your best bet, Paul296, can you contact Shaun to see if he can extract one from your stash of breakers?
2002 C5 2.0 HDI Estate - Jasmine - Now SORN
2011 Mini Cooper D Clubman - SOLD
2016 Mercedes A180D Sport - Auto refinement
1992 TZD Turbo - Bluebell - My daily
1991 Gti 16V - Blaze - crash damaged, will get repaired.
1990 Gti 8Valve SOLD - looks like it's been scrapped
2002 Mini Cooper S - SOLD - i miss this car
1992 TXD - Scrapped in March 2014
1988 CX 25 GTI Turbo2 - SORN
1996 - AX Memphis 1.5D - Dream - SORN
I'm not just a username, i'm also called Matthew.
2011 Mini Cooper D Clubman - SOLD
2016 Mercedes A180D Sport - Auto refinement
1992 TZD Turbo - Bluebell - My daily
1991 Gti 16V - Blaze - crash damaged, will get repaired.
1990 Gti 8Valve SOLD - looks like it's been scrapped
2002 Mini Cooper S - SOLD - i miss this car
1992 TXD - Scrapped in March 2014
1988 CX 25 GTI Turbo2 - SORN
1996 - AX Memphis 1.5D - Dream - SORN
I'm not just a username, i'm also called Matthew.
- JayW
- 1K Away
- Posts: 1590
- Joined: Thu Dec 07, 2006 6:40 pm
- Location: Now listen here you mullet...
- x 13
Re: Door pins and a filler neck nozzle
The main fuel tanks are the same. But, to remove the extra tank would mean replacing it with the long rubber pipework so not really worthwhile imo.Philip Chidlow wrote:Is it an option to swap the tank to suit whichever neck you can find?
The neck for the "lesser" models is about 10" long with the breather right near the top whereas the one Kitch wants is only around 4" long and at a much sharper angle to meet the close-coupled extra tank.
From my recollection of the two i'm pretty sure you wouldn't be able to cut the longer one down as it would nowhere near line up due to the angle and "throw".
If someone could successfully seperate a bayonet from a neck (which are all the same) then Rich can just mastic it onto his.
Last edited by JayW on Fri Sep 28, 2012 7:20 pm, edited 1 time in total.
I have zero patience for your tedium.
-
- Over 2k
- Posts: 6417
- Joined: Sun Jul 03, 2005 9:36 pm
- Location: Fareham, Hants
- My Cars: Too many to list
- x 88
- Contact:
Re: Door pins and a filler neck nozzle
Balls
Thanks for the info.
So anyone got one of these bad boys then?!
Thanks for the info.
So anyone got one of these bad boys then?!
One third of a three-spoke BX columnist team for the Citroenian magazine.
CCC BX registrar: The national BX register - click to submit a car!
1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
CCC BX registrar: The national BX register - click to submit a car!
1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
Re: Door pins and a filler neck nozzle
i would stick a piece of plastic over your hole to stop water ingress,
matbe stick it across the top edge with gaffer tape to divert water away
matbe stick it across the top edge with gaffer tape to divert water away
curent ride
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)