The rubber strip that sits above the bumper on a Mk1, drivers side please.
Fitted the new wing to the GT which is sadly off colour but will have to do for now as it considerably straighter than the previous one but notices that in the impact a few years back the rubber strip was damaged and held together by the tape it was stuck on with!
Thanks.
Mk1 wing finisher.
- Tim Leech
- Over 2k
- Posts: 15565
- Joined: Tue Apr 15, 2008 11:12 am
- Location: Derbyshire
- My Cars: Various
- x 141
Mk1 wing finisher.
Lots of Motors, mostly semi broken....
Re: Mk1 wing finisher.
Bugger!! I have a pair of these Tim, brand spanking new old stock in their Citroen bags but both passenger[NSF] side.
Had to use the last one i had of the correct side for you on Sophie.
Andy
Had to use the last one i had of the correct side for you on Sophie.
Andy
- Tim Leech
- Over 2k
- Posts: 15565
- Joined: Tue Apr 15, 2008 11:12 am
- Location: Derbyshire
- My Cars: Various
- x 141
Re: Mk1 wing finisher.
No worries Andy, I've glued the old one back together for now but need one for the future.
Lots of Motors, mostly semi broken....