Various bits for grabs bx

[rutter123]

Pair of o/e front wishbones marked v260/261 needs new bushes
Diesel starter motor 17/19d/td known good
Front bumper brackets pair with all good lugs
Complete upper/lower speedo cable the upper plastic collar is broke but still works ok
Torque converter 19tgd Sachs
Auto gearshift lever and selector window
Auto bottom gearbox cover plate and pipe bracket
Hyd pump base bracket (auto box) think they differ from manual
Hyd pump adjuster bracket
Auto pedal box good and solid
Auto brake pedal rubber
12 standard wheel bolts (steels)
2 bonnet buffers
1 thrust bearing ball pivot type gti/d
1 bonnet switch
3 bayonet headlamp fixings no pins
1 o/s/f bumper trim blade
1 fuel rail gti
1 boot light switch and lens
1 foglamp back needs chroming but still intact with lampholder and rubber seal
1 bumper/splitter insert

[Mothman]

Hi bud,

i would be interested in the auto gear shift lever and selector window if its for a RHD motor, ie the numbers etc are on the rhs of the plate.

Andy

[rutter123]

Hi bud,

i would be interested in the auto gear shift lever and selector window if its for a RHD motor, ie the numbers etc are on the rhs of the plate.

Andy

From a 91 rhd tgd so should be ok.

[really?]

Hi there, would like your front bumper brackets please.

Could you pm me with details please. Thanks

[Mothman]

Hi bud,

i would be interested in the auto gear shift lever and selector window if its for a RHD motor, ie the numbers etc are on the rhs of the plate.

Andy

From a 91 rhd tgd so should be ok.

Didnt answer my question bud.
Ime only interested if the selector window is on the RHS, not interested if its not. Can you see it all when you are driving the motor? Piccy would sort this.

Andy

[Defender110]

None of the selectors were made with the window on the right hand side, you have to modify them.

[Tim Leech]

None of the selectors were made with the window on the right hand side, you have to modify them.

Sorry Kev, thats incorrect, the very late ones did have a RHD selector, I got one off a K plated 16TXI auto that was broken and fitted it to the TZI, but had previously adapted the existing one with some superglue and fiddling.

[David]

None of the selectors were made with the window on the right hand side, you have to modify them.

Sorry Kev, thats incorrect, the very late ones did have a RHD selector, I got one off a K plated 16TXI auto that was broken and fitted it to the TZI, but had previously adapted the existing one with some superglue and fiddling.

I can't remember what side my selector plate was on, But I don't remember any issues in seeing it. I will have to find it & look.

Hyd pump base bracket (auto box) think they differ from manual

I still have my auto pump bracket on my manual 4x4 gearbox & it fitted fine, So I assume they are the same.

[Defender110]

None of the selectors were made with the window on the right hand side, you have to modify them.

Sorry Kev, thats incorrect, the very late ones did have a RHD selector, I got one off a K plated 16TXI auto that was broken and fitted it to the TZI, but had previously adapted the existing one with some superglue and fiddling.

I stand corrected, mine was on the left originally and I too had to adapt it to the right.

[rutter123]

Just to clarify the selector window is to the right of the shifter.

[Tim Leech]

Just to clarify the selector window is to the right of the shifter.

A worthwhile upgrade then for someone with an auto!

[bx petrol auto saloon]

Dear Andy,
Just had a quick shufty on mine and the " window " with the letters are to the right of the gearlever
I hope this Andy
Vince,

[demag]

How do you mod them then? Mine is on the left.

[stevieb]

would he bumper trim be the wide black strip mounted on the surface?

[rutter123]

Stevieb, the bumper trim is just the small blade that fits to the rear of the bumper just below the front edge of wheelarch, about 2 inches long.