WANTED 2 front seatbelt clips

Buy or sell parts etc. Please put 'Wanted' in the title if it is a request for parts.
User avatar
thanuttiscotsman
BXpert
BXpert
Posts: 197
Joined: Thu Oct 26, 2006 11:42 pm

WANTED 2 front seatbelt clips

Post by thanuttiscotsman » Sat Dec 02, 2006 5:49 pm

hi folks,
as it says iam after 2 front seatbelt clips i need 1 driver and 1 passenger clips , the bits that are attached to the seats. they must be from a 1990 onward bx. i have recently changed my full interior, basically replaced a slightly ripped 16v interior with a good one but i forgot to change the belt clips over and i gave the old interior to a mate who thought he might use it but he has binned it and the clips are gone and now my front seatbelts are useless.

cheers rossco
1989 BX 16v ph1 Chipped, k+N, full scorpion, weber throttle body, NOS 1990 BX 16v ph2
1996 transit 2.5di 80 swb
2006 Suzuki GSR 600cc Fast as F**K!

User avatar
BX Bandit
Backslash Bandit
Posts: 2583
Joined: Thu Aug 31, 2006 7:46 am
Location: Closet boozing...normally under bonnet
x 1

Post by BX Bandit » Sat Dec 02, 2006 6:10 pm

I have exactly what you want!!!! pm your address and I'll wack em in the post!!!
have some balls
1990 BX 16V Platinum Grey
1990 BX TZD (with A/C) Pink
1990 BX TGD White
2003 Audi A6 2.5 TDi
1960 Morris Minor Clarondon Grey
1971 Triumph 2000 Auto Valencia Blue

User avatar
docchevron
The Immoderate half of the admin team
Posts: 7524
Joined: Sun Jun 04, 2006 7:03 pm
Location: A Bucket of Fish
x 7

Post by docchevron » Sat Dec 02, 2006 6:23 pm

Do you have exactley what I want??? :lol: :lol:

Dont think it's postable though!!!!! :shock:

Er, dude's before getting too carried away here, You'll be aware that there are three types of buckle and the clips are not interchangable.

May be worth measuring the clip on your belt Rossco??

Cheers
Chris G
Smokes lots, because enough's enough already!

Far too many BX's, a bus, an ambulance a few trucks, not enough time and never enough cash...

User avatar
BX Bandit
Backslash Bandit
Posts: 2583
Joined: Thu Aug 31, 2006 7:46 am
Location: Closet boozing...normally under bonnet
x 1

Post by BX Bandit » Sat Dec 02, 2006 6:54 pm

As you want diesel engines the size of swimming pools then I don't have what you want!!! Good point tho Doc. Mine are 1990 onward or do we need piccies?? What do we measure??
have some balls
1990 BX 16V Platinum Grey
1990 BX TZD (with A/C) Pink
1990 BX TGD White
2003 Audi A6 2.5 TDi
1960 Morris Minor Clarondon Grey
1971 Triumph 2000 Auto Valencia Blue

User avatar
docchevron
The Immoderate half of the admin team
Posts: 7524
Joined: Sun Jun 04, 2006 7:03 pm
Location: A Bucket of Fish
x 7

Post by docchevron » Sat Dec 02, 2006 7:22 pm

:lol: :lol: :lol:
First Great Western trains have what I want! Fitting in a BX could be interesting though....
:shock:

The width and length of the clip mate. I.E. the shiny bit with the hole in it where it latches.
Theres a thin one, a thicker one and a longer one.

The difference is immediatley evident if you compare them.

The length isn't an issue as such, but the width is!

Cheers
Chris G
Smokes lots, because enough's enough already!

Far too many BX's, a bus, an ambulance a few trucks, not enough time and never enough cash...

User avatar
BX Bandit
Backslash Bandit
Posts: 2583
Joined: Thu Aug 31, 2006 7:46 am
Location: Closet boozing...normally under bonnet
x 1

Post by BX Bandit » Sat Dec 02, 2006 8:23 pm

I've heard it said that width is better than out 'n' out length - I wonder which one I have :shock: :roll: ----^
have some balls
1990 BX 16V Platinum Grey
1990 BX TZD (with A/C) Pink
1990 BX TGD White
2003 Audi A6 2.5 TDi
1960 Morris Minor Clarondon Grey
1971 Triumph 2000 Auto Valencia Blue

Geoffrey Gould
BXpert
BXpert
Posts: 545
Joined: Sat Jun 25, 2005 7:26 pm
Location: Bristol.UK.

Length and width!

Post by Geoffrey Gould » Sat Dec 02, 2006 10:10 pm

Ha no problem, just use one of Doc's lump hammers and beat the cr8p out of it, works for him. Length and width instantly adjustable.
Cheers.
Geoff.
1991 BX 1-7 td Auto.


I MAY NOT BE ALWAYS RIGHT BUT I AM
NEVER WRONG.

User avatar
docchevron
The Immoderate half of the admin team
Posts: 7524
Joined: Sun Jun 04, 2006 7:03 pm
Location: A Bucket of Fish
x 7

Post by docchevron » Sun Dec 03, 2006 12:19 am

Er, are we still talking about seat belts? :shock: :D :lol: :oops:

Width, every time, width I tell ya's. No.4 coal shovel = perfect width :twisted: :lol:

Cheers
Chris G
Smokes lots, because enough's enough already!

Far too many BX's, a bus, an ambulance a few trucks, not enough time and never enough cash...

User avatar
BX Bandit
Backslash Bandit
Posts: 2583
Joined: Thu Aug 31, 2006 7:46 am
Location: Closet boozing...normally under bonnet
x 1

Post by BX Bandit » Sun Dec 03, 2006 4:37 am

ouch! :shock: :cry: Sounds more like a pancake than anything useful!!!
have some balls
1990 BX 16V Platinum Grey
1990 BX TZD (with A/C) Pink
1990 BX TGD White
2003 Audi A6 2.5 TDi
1960 Morris Minor Clarondon Grey
1971 Triumph 2000 Auto Valencia Blue

User avatar
thanuttiscotsman
BXpert
BXpert
Posts: 197
Joined: Thu Oct 26, 2006 11:42 pm

Post by thanuttiscotsman » Sun Dec 03, 2006 10:04 am

hi there,
from what i knew there was only 2 types :? . the old ones first ones had the plain flat release button with nothing written on it. i.e 1989 back. thats the ones currently attached to my front seats. and the new ones with push written on the release button were also a slightly different shape. i have already replaced one rear clip from a spare in my ex 1.4 bx which was 1990 like my valver and it fitted in the 16v no prob and also was identical :? . anyhow so all i need to do is measure the width of the clip where it goes in? so i will get them measured and get back to you. :D

cheers rossco
1989 BX 16v ph1 Chipped, k+N, full scorpion, weber throttle body, NOS 1990 BX 16v ph2
1996 transit 2.5di 80 swb
2006 Suzuki GSR 600cc Fast as F**K!

User avatar
thanuttiscotsman
BXpert
BXpert
Posts: 197
Joined: Thu Oct 26, 2006 11:42 pm

Post by thanuttiscotsman » Sat Dec 09, 2006 5:29 pm

hi folks,
ive been up the garage and measured the belt clips. the metal part of the belt clip seems to be 2cm by 3cm thats not inc measuring any plastic just the metal. so if you have this size please let me know.

cheers rossco
1989 BX 16v ph1 Chipped, k+N, full scorpion, weber throttle body, NOS 1990 BX 16v ph2
1996 transit 2.5di 80 swb
2006 Suzuki GSR 600cc Fast as F**K!

User avatar
BX Bandit
Backslash Bandit
Posts: 2583
Joined: Thu Aug 31, 2006 7:46 am
Location: Closet boozing...normally under bonnet
x 1

Post by BX Bandit » Tue Dec 12, 2006 5:45 pm

I'll have a check mate - they look that size...
have some balls
1990 BX 16V Platinum Grey
1990 BX TZD (with A/C) Pink
1990 BX TGD White
2003 Audi A6 2.5 TDi
1960 Morris Minor Clarondon Grey
1971 Triumph 2000 Auto Valencia Blue

User avatar
thanuttiscotsman
BXpert
BXpert
Posts: 197
Joined: Thu Oct 26, 2006 11:42 pm

Post by thanuttiscotsman » Mon Dec 18, 2006 5:00 pm

hi there,
good show iam actually in big need of them :evil: . i dont actually drive my car but it is often taken to the local airstrip for a warm up :wink: and i realised the other day when i just made a corner and no more that we didnt have belts on and almost really needed them :roll: . there is a big open left hander i took a little wide in the wet and she slid a fair bit! 8)

cheers rossco
1989 BX 16v ph1 Chipped, k+N, full scorpion, weber throttle body, NOS 1990 BX 16v ph2
1996 transit 2.5di 80 swb
2006 Suzuki GSR 600cc Fast as F**K!

User avatar
BX Bandit
Backslash Bandit
Posts: 2583
Joined: Thu Aug 31, 2006 7:46 am
Location: Closet boozing...normally under bonnet
x 1

Post by BX Bandit » Mon Dec 18, 2006 8:40 pm

Sorry Nutti,

I've been a right space cadet recently!!!!!! :shock: Just measured them and they are about 1mm over the 2cm x 3cm in each direction so it sounds like they are the same. PM me your address and I'll get them sent up to you!!
have some balls
1990 BX 16V Platinum Grey
1990 BX TZD (with A/C) Pink
1990 BX TGD White
2003 Audi A6 2.5 TDi
1960 Morris Minor Clarondon Grey
1971 Triumph 2000 Auto Valencia Blue