Bits Wanted for 16TGS

Buy or sell parts etc. Please put 'Wanted' in the title if it is a request for parts.
tim leech

Bits Wanted for 16TGS

Post by tim leech » Sat Jun 02, 2007 7:22 pm

Right where do I start,

Inisde: In grey please,

1. dash clock tray (with digi clock/cut out please)
2. Pair of door speakers (standard are fine)
3. Pair of door speaker Grilles
4. Rear parcel shelf (no holes please!)
5. Passeneger side rear C post panel (inside)
6. Sunroof Motor and Switch.
7. Switch blank for centre console

Outside,

1. Passenger Front Wing (must be in white)
2. Sunroof deflector seal (yes I know ha ha)
3. Petrol cap filler metal seal (the part that the cap rubber seal itself locks into thats held in by 3 screws onto the body)

Please let me know what you have thanks! Cash waiting!

tim leech

Post by tim leech » Sat Jun 02, 2007 9:19 pm

Cavmad did u have a wing from the TZD?

Stewart (oily!)
1K Away
1K Away
Posts: 1604
Joined: Wed May 18, 2005 6:23 pm
Location: North Wales

Post by Stewart (oily!) » Sun Jun 03, 2007 12:27 pm

I have a slightly scruffy white wing, just needs a little paint, I can bring it to the national if needed.
Stewart
TZD 19 TD one of the few
Xantia Td estate, going soft

tim leech

Post by tim leech » Sun Jun 03, 2007 12:58 pm

Thanks Stuart the one on the TGS is also damaged so was trying to get one that I can just bolt straight on instead of painting etc.

tim leech

Post by tim leech » Sun Jun 03, 2007 1:55 pm

Have managed to locate all the bits I need now guys thanks.

User avatar
MULLEY
Over 2k
Posts: 8375
Joined: Thu Jun 22, 2006 11:10 pm
Location: Derbyshire
x 3

Post by MULLEY » Sun Jun 03, 2007 10:55 pm

Wow, that was quick, look forward to seeing some pics....

tim leech

Post by tim leech » Mon Jun 04, 2007 9:22 am

Fortunatly someones breaking a identical car (even same colour) so thats been a god send.

I do still need the sunroof seal deflector seal though

User avatar
MULLEY
Over 2k
Posts: 8375
Joined: Thu Jun 22, 2006 11:10 pm
Location: Derbyshire
x 3

Post by MULLEY » Mon Jun 04, 2007 6:50 pm

How about cutting up a bicycle inner tube?

tim leech

Post by tim leech » Mon Jun 04, 2007 6:56 pm

Thats a thought mate, thanks.

User avatar
MULLEY
Over 2k
Posts: 8375
Joined: Thu Jun 22, 2006 11:10 pm
Location: Derbyshire
x 3

Post by MULLEY » Tue Jun 05, 2007 12:02 am

Incase u couldnt get a proper seal, it should work ok????