BUMPER BITS
- docchevron
- The Immoderate half of the admin team
- Posts: 7524
- Joined: Sun Jun 04, 2006 7:03 pm
- Location: A Bucket of Fish
- x 7
- Contact:
- m_2975
- BXpert
- Posts: 503
- Joined: Mon Mar 27, 2006 12:08 pm
- Location: Melbourne, Australia
- My Cars: 1989 BX 19TRI Estate
1993 BX GTI
1997 Xantia CT Turbo
Are you sure??? Aren't the brake hose fitting diameters different or is that only the other end??docchevron1472 wrote:Er, the only difference is the Jaw, which on 16v calipers is wider..
Michael
My Cars:
'93 BX 19GTi Sedan 5M
'89 BX 19TRI Estate 5M
'89 AX GT(With EFI) 2door 5M
In the Family:
'74 SM IE (Fully Restored) 5M
'90 BX 19TRI122 Sedan 4A
'02 Xantia Exclusive Sedan 4AA
'06 C5 2.2HDi Estate 6A
'93 BX 19GTi Sedan 5M
'89 BX 19TRI Estate 5M
'89 AX GT(With EFI) 2door 5M
In the Family:
'74 SM IE (Fully Restored) 5M
'90 BX 19TRI122 Sedan 4A
'02 Xantia Exclusive Sedan 4AA
'06 C5 2.2HDi Estate 6A
- docchevron
- The Immoderate half of the admin team
- Posts: 7524
- Joined: Sun Jun 04, 2006 7:03 pm
- Location: A Bucket of Fish
- x 7
- Contact:
Yep. The ferral is obviousley different at the pipe end to allow for the 4.5mm pipe like, but they all be the same at the caliper end.m_2975 wrote:Are you sure??? Aren't the brake hose fitting diameters different or is that only the other end??docchevron1472 wrote:Er, the only difference is the Jaw, which on 16v calipers is wider..
Michael
Smokes lots, because enough's enough already!
Far too many BX's, a bus, an ambulance a few trucks, not enough time and never enough cash...
Far too many BX's, a bus, an ambulance a few trucks, not enough time and never enough cash...
Do these look familiar Doc. apologies for the crap picture btw. Oh, I've also got some estate rears, a TZD rad and a few other bits kicking about here if you want 'em old lad. Oh, just off the blower to an old acquaintence who I've not seen in years who says he has what sounds like a handful of Mk1 BX parts including one or two panels. Sing out if you want them mate or they'll be in the next Fiat/VW/Ford/BMW to meet a timely death in the jaws of the crusher.
Vauxhall apologist.
Do these look familiar Doc. apologies for the crap picture btw. Oh, I've also got some estate rears, a TZD rad and a few other bits kicking about here if you want 'em old lad. Oh, just off the blower to an old acquaintence who I've not seen in years who says he has what sounds like a handful of Mk1 BX parts including one or two panels. Sing out if you want them mate or they'll be in the next Fiat/VW/Ford/BMW to meet a timely death in the jaws of the crusher.
Vauxhall apologist.
- docchevron
- The Immoderate half of the admin team
- Posts: 7524
- Joined: Sun Jun 04, 2006 7:03 pm
- Location: A Bucket of Fish
- x 7
- Contact:
They look like standard BX calipers to me Billy....
May aswell hoof them in with the panels mate.
With the weigh in value these days you should do well1
Ta for looking though dude!
May aswell hoof them in with the panels mate.
With the weigh in value these days you should do well1
Ta for looking though dude!
Smokes lots, because enough's enough already!
Far too many BX's, a bus, an ambulance a few trucks, not enough time and never enough cash...
Far too many BX's, a bus, an ambulance a few trucks, not enough time and never enough cash...
- m_2975
- BXpert
- Posts: 503
- Joined: Mon Mar 27, 2006 12:08 pm
- Location: Melbourne, Australia
- My Cars: 1989 BX 19TRI Estate
1993 BX GTI
1997 Xantia CT Turbo
Sorry to hijack the thread earlier...I think that we all got a bit carried away.
In case it's just as cheap and faster, here are the part numbers.
They are all available and I'd imagine not too expensive at all.
Jon at Duxford Citroën can help you as he has helped me in the past.
Duxford Web Link
Retaining Clip 96 093 121
Screw 96 995 463
Michael
Yet again no one has what you are after, however I have the plastic pieces that push into the crossmember. I'm not sure if I have the matching torx bolts though.....do you need the bolts too?tim leech wrote:Right has anyone got any bumper bits please!!!!!!!!!!!
In case it's just as cheap and faster, here are the part numbers.
They are all available and I'd imagine not too expensive at all.
Jon at Duxford Citroën can help you as he has helped me in the past.
Duxford Web Link
Retaining Clip 96 093 121
Screw 96 995 463
Michael
My Cars:
'93 BX 19GTi Sedan 5M
'89 BX 19TRI Estate 5M
'89 AX GT(With EFI) 2door 5M
In the Family:
'74 SM IE (Fully Restored) 5M
'90 BX 19TRI122 Sedan 4A
'02 Xantia Exclusive Sedan 4AA
'06 C5 2.2HDi Estate 6A
'93 BX 19GTi Sedan 5M
'89 BX 19TRI Estate 5M
'89 AX GT(With EFI) 2door 5M
In the Family:
'74 SM IE (Fully Restored) 5M
'90 BX 19TRI122 Sedan 4A
'02 Xantia Exclusive Sedan 4AA
'06 C5 2.2HDi Estate 6A