BX parts clear out

zebedee150 · Post by **zebedee150** » Sun Feb 24, 2008 7:27 pm

Having just picked up another TZD Turbo estate I seriously need to have a clearout.

I will be breaking my white estate, which has a full interior from a 1988 gti with one piece back seat, so if anyone needs parts let me know.

I can run them up to Birmingham w/end march 9th.

Also have an unused rebuilt Bosch pump and injectors for a normally aspirated 1.9 diesel for anyone wanting to run 'biofuel'.

Loads of other bits on the shelf let me know, could do with the space in exchange for small change!

Brian King · Post by **Brian King** » Wed Mar 26, 2008 4:21 pm

Have you got a front bumper?

zebedee150 · Post by **zebedee150** » Thu Mar 27, 2008 7:17 pm

Hi Brian,
Yes,Car is still in one piece, so bumper and all panels are available. Need to get it chopped soon so let me know if anyone else needs bits.

surrey_man · Post by **surrey_man** » Thu Mar 27, 2008 7:22 pm

hiya do u have the number plate light thing?? am after one please

cheers
jon

Brian King · Post by **Brian King** » Fri Mar 28, 2008 8:22 pm

Thanks Zebedee. However i have just found out that Citroen still do brand new bx bumpers, and the cost is but a fraction of the painting. Since the accident has blown my ncb and excess anyway I might as well get my nose in the trough with everybody else and put in a claim. Thanks anyway.

bx tgd · Post by **bx tgd** » Sun Mar 30, 2008 7:45 pm

hi i have a 1.8td, will the bosch pump fit it?

thanks

geoff

DLM · Post by **DLM** » Mon Mar 31, 2008 4:49 pm

Normally-aspirated diesels and turbodiesels have different model numbers for pumps & injectors - hence you might have problems.

andycadabra · Post by **andycadabra** » Tue Apr 29, 2008 8:22 am

Do you still have it?- I need a drivers side lock and key, and passenger side if poss. Cheers

jwthwaites96 · Post by **jwthwaites96** » Tue Apr 29, 2008 3:59 pm

Hi,
would the front drivers seat be able to fit into a BX 1.9 diesel 1990? do you have a price list? I kind of buy on impulse, lol. Would be interested to see what you have, if they are compatible with my car.

Cheers
John

DLM · Post by **DLM** » Thu May 01, 2008 11:46 am

Some DTR trim front seats from my old TZD available via the Doc if you're looking for something nearer to Brizzle. Virtually any BX front seat is compatible - and if it's just lower cushion wear you can swap that part in 2 minutes if you don't fancy twirling screwheads to swap the whole seat.

zebedee150 · Post by **zebedee150** » Fri May 02, 2008 4:43 pm

Hi there, Thanks for the interest. Car is still here, wife still nagging for me to get rid of it!
To answer a couple of questions.
Seats are dark blue Gti with the silver grey herringbone center panels. No door cards, wife did pitch those! Up in Weston in the next couple of weeks so close to Bristol. £10 a seat or £20 quid the lot!
Locks- Have a full set of matching door, ignition, etc, etc with two keys!
Pretty rare these days. £15

I think someone was looking for a turbo rad surround? Again small change and it's yours!

MULLEY · Post by **MULLEY** » Fri May 02, 2008 10:47 pm

Zebedee, PM'd

MULLEY · Post by **MULLEY** » Fri May 02, 2008 10:53 pm

Oh, forgot to mention that if its a non knackered turbo rad surround i'd be up for having that as well if its still available?

Just to double check, its the plastic which connects the top of the rad to the front of the car to stop it from wobbling about? about 3/4metre long?

zebedee150 · Post by **zebedee150** » Sat May 03, 2008 1:58 pm

Hi Mulley.
This is a TZD turbo, so has the longer rad with remote top up bottle. Sorry.

MULLEY · Post by **MULLEY** » Sat May 03, 2008 11:05 pm

Thats the one i need Jeff, as i'm trying to resurrect my TZD Turbo

, its not for the TXD....

BX Club Forum