So are XU-based mk1 subframes any different to later subframes? I know there's a member running fore to aft, but I could put captive nuts for this in a mk2 frame.
Got the TRS up on the ramp and the subframe is toast Only done 17k miles, it's sitting near the beach in Swansea that's done it, LHM spill or no LHM spill
Mk1 1600 subframes
-
- Over 2k
- Posts: 6417
- Joined: Sun Jul 03, 2005 9:36 pm
- Location: Fareham, Hants
- My Cars: Too many to list
- x 88
- Contact:
Mk1 1600 subframes
One third of a three-spoke BX columnist team for the Citroenian magazine.
CCC BX registrar: The national BX register - click to submit a car!
1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
CCC BX registrar: The national BX register - click to submit a car!
1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
Re: Mk1 1600 subframes
MK1 subframes use bearings at the wishbone.
MK2 use rubber mounts.
You can mount the front rear mount, you will need this for the pump HP pipe run.
The wishbones are also a different size so if you get a different subframe make sure you get the A-frames as well.
MK2 use rubber mounts.
You can mount the front rear mount, you will need this for the pump HP pipe run.
The wishbones are also a different size so if you get a different subframe make sure you get the A-frames as well.
Neil
A476 RBX
Series 1 BX 16TRS
+ 2015 C4 Flair (boring compared to BX!)
A476 RBX
Series 1 BX 16TRS
+ 2015 C4 Flair (boring compared to BX!)
-
- Over 2k
- Posts: 6417
- Joined: Sun Jul 03, 2005 9:36 pm
- Location: Fareham, Hants
- My Cars: Too many to list
- x 88
- Contact:
Re: Mk1 1600 subframes
Hmmm, I forgot about the bearings/bushes. Think I might try and fix the original then. Mk1 subframes are probably few and far between!NeilGP wrote:MK1 subframes use bearings at the wishbone.
MK2 use rubber mounts.
You can mount the front rear mount, you will need this for the pump HP pipe run.
The wishbones are also a different size so if you get a different subframe make sure you get the A-frames as well.
Cheers
One third of a three-spoke BX columnist team for the Citroenian magazine.
CCC BX registrar: The national BX register - click to submit a car!
1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
CCC BX registrar: The national BX register - click to submit a car!
1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
Re: Mk1 1600 subframes
According to the Haynes, Mk2 type bushes are retrofittable to a mk 1 subframe. I'd guess you need the later 16mm wishbone bolts (as opposed to 14mms'). Can't really see why there would be any other majpr difference.
Local good guy mech/tech said Mk2 type is much more durable as the needle rollers used to get grit in and wear unevenly. Not sure about wishbones.
He may know more - try Nick at Surrey Auto Services based in Oakhanger - googly for contact number.
Local good guy mech/tech said Mk2 type is much more durable as the needle rollers used to get grit in and wear unevenly. Not sure about wishbones.
He may know more - try Nick at Surrey Auto Services based in Oakhanger - googly for contact number.
- ken newbold
- Over 2k
- Posts: 4408
- Joined: Sun Aug 14, 2005 10:53 pm
- x 5
Re: Mk1 1600 subframes
Not all Mk1s had roller bearings, some had the later type bushes, better idea
They think it's all over, it is now!
- MULLEY
- Over 2k
- Posts: 8406
- Joined: Thu Jun 22, 2006 11:10 pm
- Location: Derbyshire
- My Cars: 1999 Xsara LX 2.0HDI (90) Hatch - Fern
2002 C5 2.0 HDI (110) Estate - Jasmine - SORN
2011 Mini Cooper D Clubman - SOLD
2016 Mercedes A180D Sport - Auto refinement
1992 TZD Turbo - Bluebell - SORN
1992 TZD Turbo Estate - SORN
1991 Gti 16V - Blaze - crash damaged, will get repaired - SORN
1990 Gti 8Valve SOLD - looks like it's been scrapped
2002 Mini Cooper S - SOLD - i miss this car
1992 TXD - Scrapped in March 2014
1988 CX 25 GTI Turbo2 - SORN
1996 - AX Memphis 1.5D - Dream - SORN - x 8
Re: Mk1 1600 subframes
As above regarding the 2 types of MK1's, my understanding is the roller bearing models are more floaty & softer riding.
2002 C5 2.0 HDI Estate - Jasmine - Now SORN
2011 Mini Cooper D Clubman - SOLD
2016 Mercedes A180D Sport - Auto refinement
1992 TZD Turbo - Bluebell - My daily
1991 Gti 16V - Blaze - crash damaged, will get repaired.
1990 Gti 8Valve SOLD - looks like it's been scrapped
2002 Mini Cooper S - SOLD - i miss this car
1992 TXD - Scrapped in March 2014
1988 CX 25 GTI Turbo2 - SORN
1996 - AX Memphis 1.5D - Dream - SORN
I'm not just a username, i'm also called Matthew.
2011 Mini Cooper D Clubman - SOLD
2016 Mercedes A180D Sport - Auto refinement
1992 TZD Turbo - Bluebell - My daily
1991 Gti 16V - Blaze - crash damaged, will get repaired.
1990 Gti 8Valve SOLD - looks like it's been scrapped
2002 Mini Cooper S - SOLD - i miss this car
1992 TXD - Scrapped in March 2014
1988 CX 25 GTI Turbo2 - SORN
1996 - AX Memphis 1.5D - Dream - SORN
I'm not just a username, i'm also called Matthew.
-
- Over 2k
- Posts: 6417
- Joined: Sun Jul 03, 2005 9:36 pm
- Location: Fareham, Hants
- My Cars: Too many to list
- x 88
- Contact:
Re: Mk1 1600 subframes
Mine's about as early as mk1 RHD models get, so guessing I've got bearings. You know I never even checked!
One third of a three-spoke BX columnist team for the Citroenian magazine.
CCC BX registrar: The national BX register - click to submit a car!
1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
CCC BX registrar: The national BX register - click to submit a car!
1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
- ken newbold
- Over 2k
- Posts: 4408
- Joined: Sun Aug 14, 2005 10:53 pm
- x 5
Re: Mk1 1600 subframes
and noisier and more vibration through the steering.MULLEY wrote:As above regarding the 2 types of MK1's, my understanding is the roller bearing models are more floaty & softer riding.
and a bugger to change
They think it's all over, it is now!
- MULLEY
- Over 2k
- Posts: 8406
- Joined: Thu Jun 22, 2006 11:10 pm
- Location: Derbyshire
- My Cars: 1999 Xsara LX 2.0HDI (90) Hatch - Fern
2002 C5 2.0 HDI (110) Estate - Jasmine - SORN
2011 Mini Cooper D Clubman - SOLD
2016 Mercedes A180D Sport - Auto refinement
1992 TZD Turbo - Bluebell - SORN
1992 TZD Turbo Estate - SORN
1991 Gti 16V - Blaze - crash damaged, will get repaired - SORN
1990 Gti 8Valve SOLD - looks like it's been scrapped
2002 Mini Cooper S - SOLD - i miss this car
1992 TXD - Scrapped in March 2014
1988 CX 25 GTI Turbo2 - SORN
1996 - AX Memphis 1.5D - Dream - SORN - x 8
Re: Mk1 1600 subframes
There you go Kitch, a volunteer up North
2002 C5 2.0 HDI Estate - Jasmine - Now SORN
2011 Mini Cooper D Clubman - SOLD
2016 Mercedes A180D Sport - Auto refinement
1992 TZD Turbo - Bluebell - My daily
1991 Gti 16V - Blaze - crash damaged, will get repaired.
1990 Gti 8Valve SOLD - looks like it's been scrapped
2002 Mini Cooper S - SOLD - i miss this car
1992 TXD - Scrapped in March 2014
1988 CX 25 GTI Turbo2 - SORN
1996 - AX Memphis 1.5D - Dream - SORN
I'm not just a username, i'm also called Matthew.
2011 Mini Cooper D Clubman - SOLD
2016 Mercedes A180D Sport - Auto refinement
1992 TZD Turbo - Bluebell - My daily
1991 Gti 16V - Blaze - crash damaged, will get repaired.
1990 Gti 8Valve SOLD - looks like it's been scrapped
2002 Mini Cooper S - SOLD - i miss this car
1992 TXD - Scrapped in March 2014
1988 CX 25 GTI Turbo2 - SORN
1996 - AX Memphis 1.5D - Dream - SORN
I'm not just a username, i'm also called Matthew.