the chap who took the engine out of my bx has lost all of the needle bearings and one outer race from the tripod joint on the drivers side inner CV joint. sigh.
if anyone has one, please let me know.. i cant seem to find one new for the BX. unless they are found on all XUD engines?
driver side inner CV tripod joint
- Dragon Man
- BXpert
- Posts: 187
- Joined: Sat Aug 22, 2015 3:45 am
- Location: The East Midlands, Derby
- My Cars: Citroen Dispatch 2.0L HDi 2005
Fiat Panda 4x4 Sisley 1991 - x 6
- Contact:
driver side inner CV tripod joint
- JohnDragonMan
Drives: Citroen Dispatch with retrofitted air conditioning
Classic Fiat Panda 4x4 Sisley named Talon (long term storage)
always buy base spec. that way you have the fun of putting all the cool bit on your vehicle
Drives: Citroen Dispatch with retrofitted air conditioning
Classic Fiat Panda 4x4 Sisley named Talon (long term storage)
always buy base spec. that way you have the fun of putting all the cool bit on your vehicle
-
- Over 2k
- Posts: 2695
- Joined: Sun Sep 02, 2012 9:54 pm
- Location: South Lincs
- My Cars: 90 Bx Tzd turbo ven red 295k
74 D Super 5 black
05 Volvo V50 2.0d 180k
65 Peugeot Boxer work van 280k - x 137
Re: driver side inner CV tripod joint
i have driveshafts for a t/d as well. can send it with the tap? t/d and gti's have fatter driveshafts than the n/a's 16/19's etc tho they are interchangable they are bigger diameter shafts to cope with the extra horses.
90 BX Tzd turbo 294k SORN undergoing major surgery
90 BX Tzd turbo estate 46k awaiting surgery
65 Peugeot Boxer Van the new workhorse
52 Toyota Rav4 180k Bulletproof Jap reliability
90 BX Tzd turbo estate 46k awaiting surgery
65 Peugeot Boxer Van the new workhorse
52 Toyota Rav4 180k Bulletproof Jap reliability
- Dragon Man
- BXpert
- Posts: 187
- Joined: Sat Aug 22, 2015 3:45 am
- Location: The East Midlands, Derby
- My Cars: Citroen Dispatch 2.0L HDi 2005
Fiat Panda 4x4 Sisley 1991 - x 6
- Contact:
Re: driver side inner CV tripod joint
umm sure.. i only need the gearbox side 3 bearing end bit that sits inside the CV cup. i'll send extra cash to compensate.. heh dont happen to have the rear window washer jet too do you? mine is gone :/
- JohnDragonMan
Drives: Citroen Dispatch with retrofitted air conditioning
Classic Fiat Panda 4x4 Sisley named Talon (long term storage)
always buy base spec. that way you have the fun of putting all the cool bit on your vehicle
Drives: Citroen Dispatch with retrofitted air conditioning
Classic Fiat Panda 4x4 Sisley named Talon (long term storage)
always buy base spec. that way you have the fun of putting all the cool bit on your vehicle
-
- Over 2k
- Posts: 6417
- Joined: Sun Jul 03, 2005 9:36 pm
- Location: Fareham, Hants
- My Cars: Too many to list
- x 88
- Contact:
Re: driver side inner CV tripod joint
Why the bloke didn't just remove the shaft baffles me. It's two M7 nuts!
One third of a three-spoke BX columnist team for the Citroenian magazine.
CCC BX registrar: The national BX register - click to submit a car!
1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
CCC BX registrar: The national BX register - click to submit a car!
1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
-
- Over 2k
- Posts: 2695
- Joined: Sun Sep 02, 2012 9:54 pm
- Location: South Lincs
- My Cars: 90 Bx Tzd turbo ven red 295k
74 D Super 5 black
05 Volvo V50 2.0d 180k
65 Peugeot Boxer work van 280k - x 137
Re: driver side inner CV tripod joint
No rear window wash jet its gone. /\ as Kitch says 2 11mm nuts is all that hold the intermediate bearing in place i suspect your man has tried to pull the shaft out without undoing these first. i might have an o/s inner joint which has been cut from a shaft it mayhave the bearings and bits you need.
90 BX Tzd turbo 294k SORN undergoing major surgery
90 BX Tzd turbo estate 46k awaiting surgery
65 Peugeot Boxer Van the new workhorse
52 Toyota Rav4 180k Bulletproof Jap reliability
90 BX Tzd turbo estate 46k awaiting surgery
65 Peugeot Boxer Van the new workhorse
52 Toyota Rav4 180k Bulletproof Jap reliability