I can vouch for this method - Tom had the doseur changed in very good time on my Silver Machine with this method. An extra pair of hands to steady and relocate doseur and studs inside the car helps too. I'd hold off on the lump of 3" x 3" timber for the time being though, Oscar....I'm in for the Doseur. I've done a couple on TDs and I don't see what the fuss is all about. (Last one took no more than three hours. Two tips: Tie the 8mm spanner to your wrist and drop the top engine mount so you can shove a baulk of 3x3 between the intercooler and the bulkhead.
Asking for a weekend of someone's time.
-
DLM
- Our Trim Guru
- Posts: 1624
- Joined: Mon May 16, 2005 6:41 pm
- Location: Gosport, Hampshire, UK
- My Cars: 90s/00s - lots of BX hatches/estates 16/19i/17td/19d
2020s - A shinier red TZD estate has replaced scruffy 19TXD "Red Shed". - x 13
)
Back on two wheels and pedal power for the moment.