Where exactly is the inlet manifold drain plug on a BX16/19 and is it *imperative* to remove it when draining the cooling system? Haynes BOL tells me to remove it at the same time as I loosen all the bleed screws... but there's no picture of the actual location, just a simple schematic diagram of the cooling system where it's arrowed next to the water pump... I've looked and I can't find anything obvious.
Cheers,
Mark.
BX16 Draining coolant
-
mnde
- Meteor Man
- Posts: 1453
- Joined: Tue Oct 18, 2005 5:10 pm
- Location: Aldershot, Hants
- My Cars: 2007 Citroen Xsara Picasso 1.6 16V VTX
1982 Citroen GSA Spécial Estate - gone to a new home
1991 Citroen BX16 TGS Meteor - still out there somewhere!
-
mnde
- Meteor Man
- Posts: 1453
- Joined: Tue Oct 18, 2005 5:10 pm
- Location: Aldershot, Hants
- My Cars: 2007 Citroen Xsara Picasso 1.6 16V VTX
1982 Citroen GSA Spécial Estate - gone to a new home
1991 Citroen BX16 TGS Meteor - still out there somewhere!