BX XU PETROL BOTTOM PULLEY

Buy or sell parts etc. Please put 'Wanted' in the title if it is a request for parts.
bx petrol auto saloon
BXpert
Posts: 477
Joined: Mon Aug 22, 2011 11:50 am
Location: Tonbridge KENT
My Cars: Citroens SAABs and Vauxhalls
x 2

BX XU PETROL BOTTOM PULLEY.

Post by bx petrol auto saloon »

Dear Tim.
Could be tight tappets, unless they are hydraulic :?:
Maybe dribbling injectors :?:
Vince.
Passion Hydropneumatic Citroen,s

Cars;- 1993 White Citroen BX 1.6 TXi petrol
saloon auto with air-con & ABS.
47,594 Miles from new.
Owned for 3 years sorned.
1988 Silver SAAB 900i 2.0 8v F/lift,
saloon 5sp with 3 spoke Ronals,
69,000 Miles from new.
Owned for 15 years T & T.
User avatar
Tim Leech
Over 2k
Posts: 15565
Joined: Tue Apr 15, 2008 11:12 am
Location: Derbyshire
My Cars: Various
x 141

Re: BX XU PETROL BOTTOM PULLEY.

Post by Tim Leech »

bx petrol auto saloon wrote:Dear Tim.
Could be tight tappets, unless they are hydraulic :?:
Maybe dribbling injectors :?:
Vince.
Tappets are hydraulic, injectors have been checked already sorry.
Lots of Motors, mostly semi broken....
Defender110
Over 2k
Posts: 5917
Joined: Wed Dec 16, 2009 8:02 pm
Location: Harwood, Bolton
My Cars: Land Rover Discovery Series 1 200tdi 3 door
Land Rover Discovery Series 2 Facelift TD5
2020 Fiat Panda cross 4x4 twin air.
x 27

Post by Defender110 »

Could be the fact it's a petrol :?: :wink: :lol:
Kevan
1997 Mercedes C230 W202
2003 Land Rover Discovery Series 2 Facelift TD5 - Daily driver / hobby days and camping.
1993 Land Rover Discovery 200tdi Series 1 3 door - in need of TLC
2020 Fiat Panda 4x4 Cross Twin Air.
User avatar
docchevron
The Immoderate half of the admin team
Posts: 7524
Joined: Sun Jun 04, 2006 7:03 pm
Location: A Bucket of Fish
x 7
Contact:

Post by docchevron »

um, just a thought, the fuel pressure regulator is ok yes?
Smokes lots, because enough's enough already!

Far too many BX's, a bus, an ambulance a few trucks, not enough time and never enough cash...
User avatar
BX Meteor
BXpert
Posts: 985
Joined: Thu Mar 31, 2011 9:04 pm

Re: BX XU PETROL BOTTOM PULLEY.

Post by BX Meteor »

Roverman wrote:
bx petrol auto saloon wrote:Dear Tim.
Could be tight tappets, unless they are hydraulic :?:
Maybe dribbling injectors :?:
Vince.
Tappets are hydraulic, injectors have been checked already sorry.
oil feed to the tappets ?
User avatar
Tim Leech
Over 2k
Posts: 15565
Joined: Tue Apr 15, 2008 11:12 am
Location: Derbyshire
My Cars: Various
x 141

Post by Tim Leech »

docchevron wrote:um, just a thought, the fuel pressure regulator is ok yes?
Changed, and the tappets are nice and quiet.
Lots of Motors, mostly semi broken....
User avatar
BX Meteor
BXpert
Posts: 985
Joined: Thu Mar 31, 2011 9:04 pm

Post by BX Meteor »

I was working in Saudi in 2000, and one of the locals told me a story about his neighbour's car. I think it was a BMW, bought from a dealer.

One day it would not start at the neighbour's house, dealer towed it to the gagrage, car was OK.

Next day the same thing happened. Apparently this went on day after day for ages. Eventually the neighbour was told that another neighbour was jealous and had cast a spell on the car. They got their local Imam to come and bless the car, and it was OK after that.

Honestly I'm not making it up, but obviously I was not there when it all happened.

Very interesting, but no use. :)
bx petrol auto saloon
BXpert
Posts: 477
Joined: Mon Aug 22, 2011 11:50 am
Location: Tonbridge KENT
My Cars: Citroens SAABs and Vauxhalls
x 2

BX XU BOTTOM PULLEY

Post by bx petrol auto saloon »

Dear Tim.
Had a thunk Tim, could be modified or race camshafts. they look the
same to the naked eye. :?:
Another thunk was if some prevoius owner had had a cambelt on
them, they may have sourced a re-con head, from a slightly different
model year perhaps. :?:
Vince.
Passion Hydropneumatic Citroen,s

Cars;- 1993 White Citroen BX 1.6 TXi petrol
saloon auto with air-con & ABS.
47,594 Miles from new.
Owned for 3 years sorned.
1988 Silver SAAB 900i 2.0 8v F/lift,
saloon 5sp with 3 spoke Ronals,
69,000 Miles from new.
Owned for 15 years T & T.
User avatar
Tim Leech
Over 2k
Posts: 15565
Joined: Tue Apr 15, 2008 11:12 am
Location: Derbyshire
My Cars: Various
x 141

Re: BX XU BOTTOM PULLEY

Post by Tim Leech »

bx petrol auto saloon wrote:Dear Tim.
Had a thunk Tim, could be modified or race camshafts. they look the
same to the naked eye. :?:
Another thunk was if some prevoius owner had had a cambelt on
them, they may have sourced a re-con head, from a slightly different
model year perhaps. :?:
Vince.
I know the history on the car Vince, the cam shaft hasnt been modified, thanks for the thought though.
Lots of Motors, mostly semi broken....
Kitch
Over 2k
Posts: 6417
Joined: Sun Jul 03, 2005 9:36 pm
Location: Fareham, Hants
My Cars: Too many to list
x 88
Contact:

Post by Kitch »

I think you're barking up the wrong tree Tim. You need to take the car to someone who knows XU engines to identify the symptoms and diagnose it. You can bring it to me if you like, but I'm a fair distance from you!

FWIW, all the earlier XU 8v's had shimmed tappets, not hydraulic. Not sure if yours is the same or whether they upgraded to hydraulic before they phased the 8v out entirely.
One third of a three-spoke BX columnist team for the Citroenian magazine.

CCC BX registrar: The national BX register - click to submit a car!

1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
User avatar
Tim Leech
Over 2k
Posts: 15565
Joined: Tue Apr 15, 2008 11:12 am
Location: Derbyshire
My Cars: Various
x 141

Post by Tim Leech »

[quote="Kitch"]I think you're barking up the wrong tree Tim. You need to take the car to someone who knows XU engines to identify the symptoms and diagnose it. You can bring it to me if you like, but I'm a fair distance from you!

quote]


I may be kitch, but we have exhausted pretty much every other avenue, Jim Eastment of Xantia fame suggested the pulley, its worth a try, the cars in bits as a non runner at the moment so its an ideal time to at least try it.
Lots of Motors, mostly semi broken....
User avatar
MULLEY
Over 2k
Posts: 8406
Joined: Thu Jun 22, 2006 11:10 pm
Location: Derbyshire
My Cars: 1999 Xsara LX 2.0HDI (90) Hatch - Fern
2002 C5 2.0 HDI (110) Estate - Jasmine - SORN
2011 Mini Cooper D Clubman - SOLD
2016 Mercedes A180D Sport - Auto refinement
1992 TZD Turbo - Bluebell - SORN
1992 TZD Turbo Estate - SORN
1991 Gti 16V - Blaze - crash damaged, will get repaired - SORN
1990 Gti 8Valve SOLD - looks like it's been scrapped
2002 Mini Cooper S - SOLD - i miss this car
1992 TXD - Scrapped in March 2014
1988 CX 25 GTI Turbo2 - SORN
1996 - AX Memphis 1.5D - Dream - SORN
x 8

Post by MULLEY »

Tim, i'm no expert on these matters, however, you've listed quite a few parts that have been replaced. Were they checked to make sure that they weren't faulty also? As an example, you might have replaced the ECU, was it the correct one & was it brand new or 2nd hand & was it tested? You might have already replaced a faulty part with another without knowing it?

I personally wouldn't spend another penny on the xantia, until you get it lexia'd & have a xantia expert thoroughly go over your car to find the issue(s). I know the car has sentimental value to you, but no point in getting despondant, afterall you've spent probably twice what the car is worth & its still in bits. Keep the faith a bit longer mate, but i don't think advice on the forum albeit well meaning will solve things, it needs to be plugged in & physically looked at by someone in the know. All the best & let us know how you get on.
2002 C5 2.0 HDI Estate - Jasmine - Now SORN
2011 Mini Cooper D Clubman - SOLD
2016 Mercedes A180D Sport - Auto refinement
1992 TZD Turbo - Bluebell - My daily
1991 Gti 16V - Blaze - crash damaged, will get repaired.
1990 Gti 8Valve SOLD - looks like it's been scrapped
2002 Mini Cooper S - SOLD - i miss this car
1992 TXD - Scrapped in March 2014
1988 CX 25 GTI Turbo2 - SORN
1996 - AX Memphis 1.5D - Dream - SORN

I'm not just a username, i'm also called Matthew.
User avatar
Tim Leech
Over 2k
Posts: 15565
Joined: Tue Apr 15, 2008 11:12 am
Location: Derbyshire
My Cars: Various
x 141

Post by Tim Leech »

The ecu was off the same age of car, and the part numbers were checked to ensure it was correct and the right engine code, it made no difference Everything else fitted was brand new.

It has been Lexia'd by sir Jim of Xantis, and there was no problems listed excpet that it couldnt find the lambda probe, which was replaced, Lexia'd again and a clean bill of health shown although it was now lumpy and sluggish were as before it pulled cleanly but very juicy.

I do appreciate everyone's input but we have tried every other avenue and keep covering old ground so if somoene DOES have a pulley then please let me know, ive got to give it a try. If that doesnt cure it then its going on a trailer down south to a man who insists he can mend it!.
Lots of Motors, mostly semi broken....
User avatar
MULLEY
Over 2k
Posts: 8406
Joined: Thu Jun 22, 2006 11:10 pm
Location: Derbyshire
My Cars: 1999 Xsara LX 2.0HDI (90) Hatch - Fern
2002 C5 2.0 HDI (110) Estate - Jasmine - SORN
2011 Mini Cooper D Clubman - SOLD
2016 Mercedes A180D Sport - Auto refinement
1992 TZD Turbo - Bluebell - SORN
1992 TZD Turbo Estate - SORN
1991 Gti 16V - Blaze - crash damaged, will get repaired - SORN
1990 Gti 8Valve SOLD - looks like it's been scrapped
2002 Mini Cooper S - SOLD - i miss this car
1992 TXD - Scrapped in March 2014
1988 CX 25 GTI Turbo2 - SORN
1996 - AX Memphis 1.5D - Dream - SORN
x 8

Post by MULLEY »

This must be driving you round the twist, i don't suppose that the ecu was actually checked to make sure that it wasn't carrying the same potential fault if it is inface a duff ecu? Do these 1.8 16v have this common emissions issue & lumpy running?

What was the reasoning behind the replacement pulley making the engine work smoothly? Even if that fixed that particular element, surely that wouldn't affect the emmissions that much?

Don't suppose you've checked the replacement lambda probe, perhaps that's gone wrong as well?

Sending it down South might be the best bet if you feel you've tried everything else. Without sounding funny, what about just buying a replacement engine if all else fails & even down South doesn't work out?
2002 C5 2.0 HDI Estate - Jasmine - Now SORN
2011 Mini Cooper D Clubman - SOLD
2016 Mercedes A180D Sport - Auto refinement
1992 TZD Turbo - Bluebell - My daily
1991 Gti 16V - Blaze - crash damaged, will get repaired.
1990 Gti 8Valve SOLD - looks like it's been scrapped
2002 Mini Cooper S - SOLD - i miss this car
1992 TXD - Scrapped in March 2014
1988 CX 25 GTI Turbo2 - SORN
1996 - AX Memphis 1.5D - Dream - SORN

I'm not just a username, i'm also called Matthew.
User avatar
mat_fenwick
Moderator
Posts: 7326
Joined: Tue Sep 20, 2005 4:08 pm
Location: North Wales
x 19

Post by mat_fenwick »

So a bit more information now - am I right in thinking that it ran well but used too much fuel so the first lambda sensor was replaced after the diagnostic check showed no lambda reading. That all sounds as you would expect, as if the ECU doesn't see a lambda reading it is likely to revert to a safe (rich) fuel map.

And now it is seeing a lambda reading but lumpy and sluggish? Is the fuel consumption the same? Are the emissions the same?

Do you know whether you can read out live data from the lambda sensor via the OBD socket? Failing that a fast acting voltmeter or an oscilloscope might be needed to see whether it is switching correctly.
Image

1993 1.9 TZD Turbo Estate
1996 3.9 V8 Discovery
1993 VW LT35 campervan
1985 Hyundai Stellar V8
2016 Hyundai iLoad
Post Reply