Rust Prevention

Frequently asked technical questions and common modifications/improvements
Post Reply
Defender110
Over 2k
Posts: 5917
Joined: Wed Dec 16, 2009 8:02 pm
Location: Harwood, Bolton
My Cars: Land Rover Discovery Series 1 200tdi 3 door
Land Rover Discovery Series 2 Facelift TD5
2020 Fiat Panda cross 4x4 twin air.
x 27

Rust Prevention

Post by Defender110 »

mat_fenwick wrote:What I've done with any welded repairs is to coat the whole patch, not just the seams, with polyurethane sealant. Then the whole lot with underbody wax. !
That's my trick too! works a treat.
Kevan
1997 Mercedes C230 W202
2003 Land Rover Discovery Series 2 Facelift TD5 - Daily driver / hobby days and camping.
1993 Land Rover Discovery 200tdi Series 1 3 door - in need of TLC
2020 Fiat Panda 4x4 Cross Twin Air.
User avatar
BX Bandit
Backslash Bandit
Posts: 2588
Joined: Thu Aug 31, 2006 7:46 am
Location: Home
My Cars: Cars
x 3

Re: New rust location

Post by BX Bandit »

What be a polyurethane sealant?
1990 BX 16V Platinum Grey
1990 BX TGD White
1960 Morris Minor Clarondon Grey
1971 Triumph 2000 Auto Valencia Blue
User avatar
mat_fenwick
Moderator
Posts: 7326
Joined: Tue Sep 20, 2005 4:08 pm
Location: North Wales
x 19

Re: New rust location

Post by mat_fenwick »

Something like Tigerseal, or Sikaflex 521 for example (although I've not been too impressed with the former). Some types of silicone sealant (the ones which smell like vinegar) will cause the steel to rust beneath it.
Image

1993 1.9 TZD Turbo Estate
1996 3.9 V8 Discovery
1993 VW LT35 campervan
1985 Hyundai Stellar V8
2016 Hyundai iLoad
Defender110
Over 2k
Posts: 5917
Joined: Wed Dec 16, 2009 8:02 pm
Location: Harwood, Bolton
My Cars: Land Rover Discovery Series 1 200tdi 3 door
Land Rover Discovery Series 2 Facelift TD5
2020 Fiat Panda cross 4x4 twin air.
x 27

Re: New rust location

Post by Defender110 »

http://www.wisegeek.org/what-is-polyure ... ealant.htm" onclick="window.open(this.href);return false;
Kevan
1997 Mercedes C230 W202
2003 Land Rover Discovery Series 2 Facelift TD5 - Daily driver / hobby days and camping.
1993 Land Rover Discovery 200tdi Series 1 3 door - in need of TLC
2020 Fiat Panda 4x4 Cross Twin Air.
citronut
Over 2k
Posts: 2781
Joined: Wed Oct 31, 2007 7:55 am
Location: EAST SUSSEX UK
x 1

Re: New rust location

Post by citronut »

i belive you can coat it in anything that is not porous, as you just need to stop the air getting at the bare metal inside,outside and between any joints/seams,

regards malcolm
curent ride
K reg BX 17TD TZD est
also own
K reg D special

no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
User avatar
BX Bandit
Backslash Bandit
Posts: 2588
Joined: Thu Aug 31, 2006 7:46 am
Location: Home
My Cars: Cars
x 3

Re: New rust location

Post by BX Bandit »

mat_fenwick wrote:Something like Tigerseal, or Sikaflex 521 for example (although I've not been too impressed with the former). Some types of silicone sealant (the ones which smell like vinegar) will cause the steel to rust beneath it.
Is brushable seam sealer suitable? Where I've applied it, it seems really durable yet like a firm rubber.
1990 BX 16V Platinum Grey
1990 BX TGD White
1960 Morris Minor Clarondon Grey
1971 Triumph 2000 Auto Valencia Blue
User avatar
barry badger
BXpert
Posts: 341
Joined: Sun Feb 12, 2012 10:17 am
Location: north west.
x 7

Re: New rust location

Post by barry badger »

IMO seam sealers the best as long as it's not being applied to too great a depth and it's all owed to dry out thoroughly before overcoating. I've tried several polyurethane adhesives and not been overly impressed with their surface adhesion.
1993 tzd estate, on sorn
1992 tzd estate, slowly being raided for parts
1992 txd estate, "doom blue" on the road
1991 4x4 estate, on sorn
Defender110
Over 2k
Posts: 5917
Joined: Wed Dec 16, 2009 8:02 pm
Location: Harwood, Bolton
My Cars: Land Rover Discovery Series 1 200tdi 3 door
Land Rover Discovery Series 2 Facelift TD5
2020 Fiat Panda cross 4x4 twin air.
x 27

Re: New rust location

Post by Defender110 »

barry badger wrote:I've tried several polyurethane adhesives and not been overly impressed with their surface adhesion.
I've found quite the opposite, we build wagon/generator bodies with it and stick 8' x 4' aluminium sheets on using it and they do not come off, you have to use a stanley blade to slice through the sealer when you need to replace them. Sticke like poop to a blanket.
Brushable seam sealer is just as good.
Kevan
1997 Mercedes C230 W202
2003 Land Rover Discovery Series 2 Facelift TD5 - Daily driver / hobby days and camping.
1993 Land Rover Discovery 200tdi Series 1 3 door - in need of TLC
2020 Fiat Panda 4x4 Cross Twin Air.
User avatar
BX Bandit
Backslash Bandit
Posts: 2588
Joined: Thu Aug 31, 2006 7:46 am
Location: Home
My Cars: Cars
x 3

Re: New rust location

Post by BX Bandit »

Seam sealer it is then - that'll do me.

Where it comes to sealing spot welded joints, surely there is a chance of sealing one edge, whilst allowing water in at the other edge? So providing a lovely trap for rust to get started?
1990 BX 16V Platinum Grey
1990 BX TGD White
1960 Morris Minor Clarondon Grey
1971 Triumph 2000 Auto Valencia Blue
User avatar
mat_fenwick
Moderator
Posts: 7326
Joined: Tue Sep 20, 2005 4:08 pm
Location: North Wales
x 19

Re: New rust location

Post by mat_fenwick »

That's where cavity wax comes in!
Image

1993 1.9 TZD Turbo Estate
1996 3.9 V8 Discovery
1993 VW LT35 campervan
1985 Hyundai Stellar V8
2016 Hyundai iLoad
User avatar
BX Bandit
Backslash Bandit
Posts: 2588
Joined: Thu Aug 31, 2006 7:46 am
Location: Home
My Cars: Cars
x 3

Re: New rust location

Post by BX Bandit »

I'd still be concerned though that water would get in and not out!
1990 BX 16V Platinum Grey
1990 BX TGD White
1960 Morris Minor Clarondon Grey
1971 Triumph 2000 Auto Valencia Blue
User avatar
mat_fenwick
Moderator
Posts: 7326
Joined: Tue Sep 20, 2005 4:08 pm
Location: North Wales
x 19

Re: New rust location

Post by mat_fenwick »

Well yes, it will tend to over time but by regularly applying wax into box sections you can minimise the chances. If you could do a perfect job with everlasting waxes and sealants it would never rust, but all coatings will fail in the end. Which is where galvanising paints and zinc rich primers come into play (or ideally proper galvanising!), as the zinc content will corrode before the steel. This should give you a fighting chance to apply a top coating again before the rust starts.
Image

1993 1.9 TZD Turbo Estate
1996 3.9 V8 Discovery
1993 VW LT35 campervan
1985 Hyundai Stellar V8
2016 Hyundai iLoad
User avatar
BX Bandit
Backslash Bandit
Posts: 2588
Joined: Thu Aug 31, 2006 7:46 am
Location: Home
My Cars: Cars
x 3

Re: New rust location

Post by BX Bandit »

You bring me to my next question actually: why not use cold galv (due to high(est) zinc content) as opposed to a zinc rich primer?
1990 BX 16V Platinum Grey
1990 BX TGD White
1960 Morris Minor Clarondon Grey
1971 Triumph 2000 Auto Valencia Blue
User avatar
mat_fenwick
Moderator
Posts: 7326
Joined: Tue Sep 20, 2005 4:08 pm
Location: North Wales
x 19

Re: New rust location

Post by mat_fenwick »

The 3 cold galvanising coatings I know of are Zinga (96% zinc), Galvafroid (90-92%) and (Bilt Hamber) Electrox (90+%). Over the last few years I reckon Zinga beats Galvafroid slightly for corrosion protection, dunno about Electrox yet but it seems to contain noticeably less zinc based on how it sands - the other 2 tend to smear a bit as you expose the metal particles. Electrox seems to sand more like a standard zinc rich primer, or for that matter like normal paints.

Zinc rich primers I'm guessing contain less zinc (they don't tend to say what content but the above 3 feel much heavier than paint) so will give less protection. I would guess significantly less protection than just a sliding scale based on zinc content, as if it's 90+% zinc the particles will likely be in electrical contact with each other. So the effective surface area that will be in contact with any bare steel (where the coating is broken) will be much higher and will take correspondingly longer to be preferentially corroded away before the steel starts rusting.

Hope I've explained myself well enough! Bit of a comparison here but obviously biased towards Zinga...

Disadvantage of cold galv. is that it seems less adherent to smooth steel - certainly the instructions I've seen give a desired roughness finish for the steel. So I'm guessing a primer will stick better to a smooth panel but not done a back to back trial to compare.

On the subject of back to back testing, I keep meaning to do something with cavity/underbody waxes. I was previously of the opinion that they were all the same, but I saw an interesting experiment on another forum (will see if I can find the link) which persuaded me otherwise. Would be good to check with my own eyes as I'm naturally suspicious (plus he only tested BH stuff versus Waxoyl; Dinitrol might be worth a look).
Image

1993 1.9 TZD Turbo Estate
1996 3.9 V8 Discovery
1993 VW LT35 campervan
1985 Hyundai Stellar V8
2016 Hyundai iLoad
User avatar
BX Bandit
Backslash Bandit
Posts: 2588
Joined: Thu Aug 31, 2006 7:46 am
Location: Home
My Cars: Cars
x 3

Re: New rust location

Post by BX Bandit »

That makes perfect sense mate and that Zinga stuff looks good. Just pulled up their website so I'm going to browse.
On the subject of testing different waxes, I'm going to try a comparable test but not in any cavity (which I admit would be a better test).
I shall try to find an area of rust big enough to apply two different waxes side by side and aside from the application of the wax itself, no other treatment will be applied. Leave for one year and then see how the rust has fared.

I needed a shutz can to pour the BH cavity wax stuff into so I bought the cheapest product from eBay which was a British made alternative to waxoyl, made by a company called Silver Hook
1990 BX 16V Platinum Grey
1990 BX TGD White
1960 Morris Minor Clarondon Grey
1971 Triumph 2000 Auto Valencia Blue
Post Reply