a little help please

Anything about BXs
Post Reply
patersom10
BXpert
Posts: 327
Joined: Wed Sep 12, 2012 11:46 pm
Location: Warwickshire

a little help please

Post by patersom10 »

Does anyone know if 309 gti seat will fit in my tgd, do they have the same runners being PSA ?
93 ZX Volcane TD
03 Xsara VTR - HDI (remapped to 140bhp)

92 BX 16v phase 2 - now sold
93 BX 17TGD - now sold
rutter123
Over 2k
Posts: 2695
Joined: Sun Sep 02, 2012 9:54 pm
Location: South Lincs
My Cars: 90 Bx Tzd turbo ven red 295k
74 D Super 5 black
05 Volvo V50 2.0d 180k
65 Peugeot Boxer work van 280k
x 136

Re: a little help please

Post by rutter123 »

Not sure on that as the bx uses pug 405 floorpans i believe, you could always just measure out the runner centres and bolt fixing holes etc, and compare,i wiuld suspect that they wouldnt be too far out. I once fitted xantia front seats into a c15 van without any alterations.
90 BX Tzd turbo 294k SORN undergoing major surgery
90 BX Tzd turbo estate 46k awaiting surgery
65 Peugeot Boxer Van the new workhorse
52 Toyota Rav4 180k Bulletproof Jap reliability
rutter123
Over 2k
Posts: 2695
Joined: Sun Sep 02, 2012 9:54 pm
Location: South Lincs
My Cars: 90 Bx Tzd turbo ven red 295k
74 D Super 5 black
05 Volvo V50 2.0d 180k
65 Peugeot Boxer work van 280k
x 136

Re: a little help please

Post by rutter123 »

Not sure on that as the bx uses pug 405 floorpans i believe, you could always just measure out the runner centres and bolt fixing holes etc, and compare,i wiuld suspect that they wouldnt be too far out. I once fitted xantia front seats into a c15 van without any alterations.
90 BX Tzd turbo 294k SORN undergoing major surgery
90 BX Tzd turbo estate 46k awaiting surgery
65 Peugeot Boxer Van the new workhorse
52 Toyota Rav4 180k Bulletproof Jap reliability
patersom10
BXpert
Posts: 327
Joined: Wed Sep 12, 2012 11:46 pm
Location: Warwickshire

Re: a little help please

Post by patersom10 »

Thanks, didn't know it had 405 floorpan.
93 ZX Volcane TD
03 Xsara VTR - HDI (remapped to 140bhp)

92 BX 16v phase 2 - now sold
93 BX 17TGD - now sold
User avatar
JayW
1K Away
Posts: 1590
Joined: Thu Dec 07, 2006 6:40 pm
Location: Now listen here you mullet...
x 13

Re: a little help please

Post by JayW »

AFAIK the BX proceded the 405 by some 5 years, so it's highly unlikely the above statement is correct.

As for the seats, i believe they are either a match or close match. If not, a couple of holes & bolts in a bit of flatbar would quickly solve it. The runners DO have multiple mounting holes in them so shouldn't e too much trouble.
I have zero patience for your tedium.
User avatar
citsncycles
Over 2k
Posts: 3224
Joined: Sun Aug 08, 2010 9:14 pm
Location: Dursley, Gloucestershire

Re: a little help please

Post by citsncycles »

It's the other way round apparently, the Pug 405 was designed on the BX floorpan!
Mike Sims
BX 19RD Estate Mk1 - Timex!
BX 4X4 Estate - Oh god, I've done it again!
BX 17RD MK1 - it called to me!
BX14 TGE, - SOLD
XM Turbo SD,GS Club Estate,Visa 17D Leader,HY Pickup,Dyane Nomad,Dyane 6,2CV AZL,Falcon S,Trabant P50,3x Land Rovers (88" series 1,109" series 2a FFR,series 2a Marshall ambulance),DKW F7, Lambretta LD150 x 1.5,Mobylette SP93,Ural Cossack,Ural M63,CZ 250 Sport,Honda Varadero 125,lots of bicycles & tricycles including (but not only) Sunbeams,Higgins & Bates!
Mothman

Re: a little help please

Post by Mothman »

citsncycles wrote:It's the other way round apparently, the Pug 405 was designed on the BX floorpan!
You are right Mike.

Andy
Dollywobbler
Over 2k
Posts: 3940
Joined: Sun Dec 04, 2005 2:25 pm
Location: Wales
Contact:

Re: a little help please

Post by Dollywobbler »

Yup. 405 developed from the BX, 309 was a Talbot Horizon replacement. Mind you, think the sporty ones used very similar seats to the 205, with which it shared a great deal.
User avatar
Thread Bear
1K Away
Posts: 1651
Joined: Sat Jun 08, 2013 9:47 am
Location: Longcot, near Faringdon, Oxfordshire
x 1

Re: a little help please

Post by Thread Bear »

When I tried putting a BX driver seat in the 405 the spacing was just different enough to not work. I therefore broke the seat squab of the 405 so it would take my girt bum without giving me back ache. BX seat is beautifully comfortable in comparison, for me - when the back is not falling off! I'm a big bloke and was on my third seat in the old Estate. The real bugger of it was the local scrappy had a 405 in it with leather interior set in good condition. Just as my 405 croaked. What sort of numbty does not sell off a leather interior before scrapping a car?
Miguel - 16 TRS Auto S, light blue, 43k miles - £450
Pluto - 14 E S, White, 105k Miles - in work
Egbert - 19 16v Gti, White, A/C & Leather, - Keeper
Walt - 17 TZD Turbo S, graphite, 70k miles, good op extras - Keeper
Scraper- 17 TZD Turbo E, blue, 208k miles - parts
Homer - 19 TXD E, Red, 189k miles - £250
Gary - 17 TZD Turbo E, 118k miles - in work

'87 Trooper, Borgwards, Saabs, MG ZB, Bellamy Trials, Fiat Jolly & Bianchina, Goggo Dart, Messerschmitt, Heinkel, Bubblecars
Mothman

Re: a little help please

Post by Mothman »

What sort of numbty does not sell off a leather interior before scrapping a car?

Ive got a really great set of MK 1 leather seats in Mollie thanks to Tim. Not yet given then a feed of hide food but that will be done. Come off a famous BX too ive been lead to believe.

Andy
Post Reply