Wanted: BX estate rear hp suspension pipes.

Buy or sell parts etc. Please put 'Wanted' in the title if it is a request for parts.
Post Reply
valerie
Confirmed BX'er
Posts: 29
Joined: Sat Apr 23, 2011 12:11 pm
x 3

Wanted: BX estate rear hp suspension pipes.

Post by valerie »

I need both the o/s and n/s rear hp suspension pipes for my BX estate. They have unfortunately fractured whilst changing the spheres. My car is now 31 years old.
rutter123
Over 2k
Posts: 2695
Joined: Sun Sep 02, 2012 9:54 pm
Location: South Lincs
My Cars: 90 Bx Tzd turbo ven red 295k
74 D Super 5 black
05 Volvo V50 2.0d 180k
65 Peugeot Boxer work van 280k
x 136

Re: Wanted: BX estate rear hp suspension pipes.

Post by rutter123 »

Pleaides in Sawtry can supply replacement pipes cut to length with new fittings and seals
01487831239
They are made from non corrosive materials
Also do mail order
90 BX Tzd turbo 294k SORN undergoing major surgery
90 BX Tzd turbo estate 46k awaiting surgery
65 Peugeot Boxer Van the new workhorse
52 Toyota Rav4 180k Bulletproof Jap reliability
User avatar
Jaba
1K Away
Posts: 1893
Joined: Tue Jul 05, 2005 7:54 am
Location: Usually in the garage
My Cars: BX GTi, C3 Auto
x 80

Re: Wanted: BX estate rear hp suspension pipes.

Post by Jaba »

Oh dear never had that before. The spheres are best loosened with the suspension still under pressure as this prevent any movement of the pipework. But its too late for you now to do this......
Good luck getting the unions out of the cylinders as they can be seized solid. Using some heat helps to free it.

So yours is a 1988 model ?
The Joy of BX with just one Citroën BX to my name now. Will I sing Bye Bye to my GTI or will it be Till death us do part.
womble3go
Confirmed BX'er
Posts: 86
Joined: Tue Feb 28, 2012 10:24 pm
x 4

Re: Wanted: BX estate rear hp suspension pipes.

Post by womble3go »

If you can get some penetrating oil on them that will help as well. Pleaides is the place to go they done me well over the years.

It might be worth think about dropping the rear sub frame to make thing easy it is 6 nuts and the pipes. Just support the car well.
valerie
Confirmed BX'er
Posts: 29
Joined: Sat Apr 23, 2011 12:11 pm
x 3

Re: Wanted: BX estate rear hp suspension pipes.

Post by valerie »

Thanks for the info. I'll have another go at the old girl, and see what happens. I am getting on a bit now,
so these tasks are becoming less and less attractive. If it proves too much, I'll put her up for sale here.
rutter123
Over 2k
Posts: 2695
Joined: Sun Sep 02, 2012 9:54 pm
Location: South Lincs
My Cars: 90 Bx Tzd turbo ven red 295k
74 D Super 5 black
05 Volvo V50 2.0d 180k
65 Peugeot Boxer work van 280k
x 136

Re: Wanted: BX estate rear hp suspension pipes.

Post by rutter123 »

Which pipes is it that you're changing?
The rear brake plpes can be done without too much hassle just the end fittings and a few clamps on the rear beam, the buggers are the hydraulic rams as Jaba says the fittings seize moreso the ram end which is a sod to get at and may need removal of the ram from the axle which then turns into a bit of a chore
Tip: to aid removal the fittings cut the old pipe away just above the fitting and use a socket on in not a spanner, gently does it and it should come out, if you snap the fitting off you're in s##t.
Your new pipes will come with 10mm fittings which are much more user friendly.
90 BX Tzd turbo 294k SORN undergoing major surgery
90 BX Tzd turbo estate 46k awaiting surgery
65 Peugeot Boxer Van the new workhorse
52 Toyota Rav4 180k Bulletproof Jap reliability
Post Reply