My BX14 RE

Tell us about life with your BX, or indeed life in general!
User avatar
Fumbler
BXpert
Posts: 211
Joined: Thu May 20, 2021 7:21 pm
Location: Tunbridge Wells
My Cars: Citroen BX14 RE
Nissan Micra Shape
x 24

Re: My BX14 RE

Post by Fumbler »

Kitch wrote:
Tue Nov 02, 2021 9:12 am
Fumbler wrote:
Mon Nov 01, 2021 8:56 pm
Kitch wrote:
Mon Nov 01, 2021 5:45 pm
What on earth has happened to those suspension pipes?!
They've been coated to within an inch of their lives with grease, as they have done since new by the looks of things. Every single pipe from the front subframe backwards has a layer of grease on it.
Yeah but they look like spaghetti!
This, this is true. No clue why they're like that apart from when someone rustproofed it years ago.

User avatar
white exec
BXpert
Posts: 601
Joined: Sat Sep 12, 2020 4:04 pm
Location: Sayalonga, Malaga
My Cars: 1992 BX19D Millesime
- LHD, NA, AC, RP_5800
1996 XM 2.5TD Exclusive
x 61

Re: My BX14 RE

Post by white exec »

They're really tangled and messed about. Should be in straight lines!
Maybe someone replaced them some time ago, and made a bit of a hash of it...

Sprayed-on wax is the usual rust-proofer for the underside, and a lot less messy. The good ones also 'creep' and penetrate, so getting into hidden nooks and crannies. You can't beat a well-waxed crannie!
Chris

User avatar
Fumbler
BXpert
Posts: 211
Joined: Thu May 20, 2021 7:21 pm
Location: Tunbridge Wells
My Cars: Citroen BX14 RE
Nissan Micra Shape
x 24

Re: My BX14 RE

Post by Fumbler »

white exec wrote:
Tue Nov 02, 2021 9:46 am
They're really tangled and messed about. Should be in straight lines!
Maybe someone replaced then some time ago, and made a bit of a hash of it...

Sprayed-on wax is the usual rust-proofer for the underside, and a lot less messy. The good ones also 'creep' and penetrate, so getting into hidden nooks and crannies. You can't beat a well-waxed crannie!
Oh well, they're not leaking and are absolutely rust-free. That's a win in my book! Perhaps they have been replaced, but the only history I have are tax discs from 1994-2002, so I have no way of checking.

It's been undercoated and cavity waxed before. There's also grease absolutely everywhere- old grease too, so someone's done a old-timer's trick in preserving the vehicle. I'll continue that and spray thick oil everywhere underneath and using cavity wax for... the cavities. I've undercoated the Micra a year or so ago so I have all the tools to get it done.

User avatar
Fumbler
BXpert
Posts: 211
Joined: Thu May 20, 2021 7:21 pm
Location: Tunbridge Wells
My Cars: Citroen BX14 RE
Nissan Micra Shape
x 24

Re: My BX14 RE

Post by Fumbler »

The going is good on this car. Brake issues on the Micra has meant it's been pressed into service while the weather is still mild. I've changed the carb over for one from a ZX 1.4 and it's excellent.

What's not so excellent is the fact that the white smoke that I've experienced for months still hasn't disappeared. It's not headgasket failure as the oil hasn't emulsified and the water level never changes. Changing the fuel mixture does nowt. I'm suspicious of the valve stem seals as the cylinder head is original to the car, unlike the rotating assembly below.

User avatar
Fumbler
BXpert
Posts: 211
Joined: Thu May 20, 2021 7:21 pm
Location: Tunbridge Wells
My Cars: Citroen BX14 RE
Nissan Micra Shape
x 24

Re: My BX14 RE

Post by Fumbler »

Charge light is flickering on and off at idle (850RPM) and won't go out unless I keep the engine at 1250. I was wonderig why the headlamps were cycling between dim and bright too... It never used to do that.

User avatar
Kitch
Over 2k
Posts: 6370
Joined: Sun Jul 03, 2005 9:36 pm
Location: Fareham, Hants
My Cars: Too many to list
x 74

Re: My BX14 RE

Post by Kitch »

Alternator dying then, or the wiring to it!
CCC BX monthly column writer bloke thingy - bx@citroencarclub.org.uk

The national BX register - click to submit a car!

1983(A) 16TRS (Rouge Valleunga) - 1987(E) GTi 16v (Noir) - 1990(H) 16Valve (Rouge Furio)

User avatar
Fumbler
BXpert
Posts: 211
Joined: Thu May 20, 2021 7:21 pm
Location: Tunbridge Wells
My Cars: Citroen BX14 RE
Nissan Micra Shape
x 24

Re: My BX14 RE

Post by Fumbler »

Kitch wrote:
Sat Nov 27, 2021 2:54 pm
Alternator dying then, or the wiring to it!
Wiring looks good so I'm expecting alternator borkage. The noise from the brushes/bearings is quite something, too.

User avatar
Kitch
Over 2k
Posts: 6370
Joined: Sun Jul 03, 2005 9:36 pm
Location: Fareham, Hants
My Cars: Too many to list
x 74

Re: My BX14 RE

Post by Kitch »

FYI you've been 'spotted' on the Facebook group. Another BXer passed your car and grabbed a pic.
CCC BX monthly column writer bloke thingy - bx@citroencarclub.org.uk

The national BX register - click to submit a car!

1983(A) 16TRS (Rouge Valleunga) - 1987(E) GTi 16v (Noir) - 1990(H) 16Valve (Rouge Furio)

User avatar
Fumbler
BXpert
Posts: 211
Joined: Thu May 20, 2021 7:21 pm
Location: Tunbridge Wells
My Cars: Citroen BX14 RE
Nissan Micra Shape
x 24

Re: My BX14 RE

Post by Fumbler »

Kitch wrote:
Sun Nov 28, 2021 6:39 pm
FYI you've been 'spotted' on the Facebook group. Another BXer passed your car and grabbed a pic.
FAEM

I seem to remember the PO is on the Facebook group which is where he got the engine rebuild pictures from when he sold it to me- he might get a kick out of seeing it again.

User avatar
Kitch
Over 2k
Posts: 6370
Joined: Sun Jul 03, 2005 9:36 pm
Location: Fareham, Hants
My Cars: Too many to list
x 74

Re: My BX14 RE

Post by Kitch »

FAEM? Googled it but all I can find is a band!
CCC BX monthly column writer bloke thingy - bx@citroencarclub.org.uk

The national BX register - click to submit a car!

1983(A) 16TRS (Rouge Valleunga) - 1987(E) GTi 16v (Noir) - 1990(H) 16Valve (Rouge Furio)

User avatar
Fumbler
BXpert
Posts: 211
Joined: Thu May 20, 2021 7:21 pm
Location: Tunbridge Wells
My Cars: Citroen BX14 RE
Nissan Micra Shape
x 24

Re: My BX14 RE

Post by Fumbler »

Kitch wrote:
Sun Nov 28, 2021 7:01 pm
FAEM? Googled it but all I can find is a band!
Haha.. just a meme-ish was of writing 'fame' :D

For some odd reason that I don't quite understand, the rear end is holding pressure a lot better than it used to- the picture on FB should show it. It could be the (mostly) new LHM that was put in it. It could also be indicitive of the spheres showing their age as it's a lot stiffer back there than it used to be.