Just wondering

Anything about BXs
Post Reply
jvbram
Confirmed BX'er
Posts: 34
Joined: Wed Jan 27, 2021 2:18 pm
Location: Auch France
My Cars: Citroen Bx 1.9d, Volvo 360, MB 206, Mitsy L200.

Just wondering

Post by jvbram »

Hi, I have two Bx hatchbacks and both sink at the back overnight whereas the front takes longer. Is that normal? Cos if anything the front is heavier so i would have thought it would sink quicker. Jack
User avatar
Fumbler
BXpert
Posts: 268
Joined: Thu May 20, 2021 7:21 pm
Location: Tunbridge Wells
My Cars: Citroen BX14 RE
Nissan Micra Shape
x 31

Re: Just wondering

Post by Fumbler »

jvbram wrote: Tue Nov 16, 2021 1:14 am Hi, I have two Bx hatchbacks and both sink at the back overnight whereas the front takes longer. Is that normal? Cos if anything the front is heavier so i would have thought it would sink quicker. Jack
AFAIK it's a combination of the LHM molecules breaking down into smaller chains, making the fluid less viscous, and the fact that the rear suspension's design, as a trailing arm suspension and being at the end of the circuit, makes it easier to sink than the front.
User avatar
deltic
BXpert
Posts: 827
Joined: Tue Jan 25, 2011 10:48 pm
x 49

Re: Just wondering

Post by deltic »

Quite normal! Newer spheres tend to stay up longer, too.
1991 BX GTi auto, grey, 137,000 miles (2015, 2017 & 2019 Citroen Classic Challenge veteran)
1991 BX GTi auto, grey, 92,000 miles (2022 Citroen Classic Challenge veteran)
2006 C4 VTR+ 2.0 Coupé, silver, 78,000 miles (RIP)
2016 Volvo V40 T2 R-Design Pro, blue, 24,000 miles
Kitch
Over 2k
Posts: 6417
Joined: Sun Jul 03, 2005 9:36 pm
Location: Fareham, Hants
My Cars: Too many to list
x 88
Contact:

Re: Just wondering

Post by Kitch »

The back is further from the safety valve, and the return system is more open, so I just assumed that was the cause. I could be wrong.
One third of a three-spoke BX columnist team for the Citroenian magazine.

CCC BX registrar: The national BX register - click to submit a car!

1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
Kaapelimies
BXpert
Posts: 289
Joined: Wed Feb 10, 2010 9:01 am
Location: Hollola, Finland
x 16

Re: Just wondering

Post by Kaapelimies »

The secret of the sinking rear is the brake valve that bleeds through a little. As rear suspension and brakes are connected. Oh, now it's not a secret anymore :/ :)
BX 4x4 estate, several BX Van's and some more normal estates in Finland.
User avatar
white exec
BXpert
Posts: 681
Joined: Sat Sep 12, 2020 4:04 pm
Location: Sayalonga, Malaga
My Cars: 1992 BX19D Millesime
- LHD, NA, AC, RP_5800
1996 XM 2.5TD Exclusive
x 70

Re: Just wondering

Post by white exec »

Just about all recent hydro' Citroens do this (except the 'anti-sink' SC/MAC models, which have an extra sphere and valves to prevent it). As Kaap says, there are more paths for fluid pressure leakage from the rear end, where brakes and rear suspension are linked.

When touring with our previous '89 1.9D, towing a caravan, we had to be careful when parking the hitched outfit for anything more than an hour or so, as the back of the car would sink, and hang its rear end from the towing ball/socket - the caravan having its corner steadies lowered. Our solution was to carry a short length of wood, which would be placed under the tow bracket, preventing the rear end sag.
Chris
rutter123
Over 2k
Posts: 2695
Joined: Sun Sep 02, 2012 9:54 pm
Location: South Lincs
My Cars: 90 Bx Tzd turbo ven red 295k
74 D Super 5 black
05 Volvo V50 2.0d 180k
65 Peugeot Boxer work van 280k
x 136

Re: Just wondering

Post by rutter123 »

Didn't early Xantia's (sinkers) suffer the same probs.
90 BX Tzd turbo 294k SORN undergoing major surgery
90 BX Tzd turbo estate 46k awaiting surgery
65 Peugeot Boxer Van the new workhorse
52 Toyota Rav4 180k Bulletproof Jap reliability
User avatar
white exec
BXpert
Posts: 681
Joined: Sat Sep 12, 2020 4:04 pm
Location: Sayalonga, Malaga
My Cars: 1992 BX19D Millesime
- LHD, NA, AC, RP_5800
1996 XM 2.5TD Exclusive
x 70

Re: Just wondering

Post by white exec »

Yes they did - XMs too. It was why the SC/MAC system for these cars (aka "anti-sink") was introduced. It isolates the front and rear suspension units from the rest of the system when the engine is switched off. It is capable of keeping the car at normal height for weeks, under most conditions. SC/MAC consists of an extra sphere, two hydraulic valves and some extra pipework.
Chris
jvbram
Confirmed BX'er
Posts: 34
Joined: Wed Jan 27, 2021 2:18 pm
Location: Auch France
My Cars: Citroen Bx 1.9d, Volvo 360, MB 206, Mitsy L200.

Re: Just wondering

Post by jvbram »

On the japanese hydraulics diagram one of the returns, coloured red, goes to a Power Cylinder. Is that the security valve? Or is that named the priority valve? In which case what is the power cylinder?
User avatar
white exec
BXpert
Posts: 681
Joined: Sat Sep 12, 2020 4:04 pm
Location: Sayalonga, Malaga
My Cars: 1992 BX19D Millesime
- LHD, NA, AC, RP_5800
1996 XM 2.5TD Exclusive
x 70

Re: Just wondering

Post by white exec »

Japanese hydraulics diagram?
Chris
User avatar
Jaba
1K Away
Posts: 1893
Joined: Tue Jul 05, 2005 7:54 am
Location: Usually in the garage
My Cars: BX GTi, C3 Auto
x 80

Re: Just wondering

Post by Jaba »

I presume you mean this: http://www.mars.dti.ne.jp/~ynar/bxorg_a ... 5/m15.html
I think that one of the power cylinders refers to the rear suspension cylinder and the one you mention possibly the pressure regulator. The security valve gives priority to the brakes when pressure drops hence its description as priority valve.
Its not a helpful diagram IMO as it is not 100% accurate and only shows the returns and is not labelled accurately due to the jp-en translation no doubt.
It might be useful when replacing the octopus though.
The Joy of BX with just one Citroën BX to my name now. Will I sing Bye Bye to my GTI or will it be Till death us do part.
jvbram
Confirmed BX'er
Posts: 34
Joined: Wed Jan 27, 2021 2:18 pm
Location: Auch France
My Cars: Citroen Bx 1.9d, Volvo 360, MB 206, Mitsy L200.

Re: Just wondering

Post by jvbram »

Yes, that diagram. But the diagram uses the term Suspension Cylinders for the the front struts not Power Cylinder. It must be the Accumulator, no?
Post Reply