BX sill bits!!!

Buy or sell parts etc. Please put 'Wanted' in the title if it is a request for parts.
Post Reply
User avatar
bernie
Likes welding rusty Fiats.
Posts: 196
Joined: Mon Sep 05, 2005 4:47 pm
Location: Southampton

BX sill bits!!!

Post by bernie »

I don't suppose anyone is cutting up a BX?

The BX TD I recently purchased has a few holes in the N/S sill area and I want to weld in some patches. Now instead of making up plates to fit perhaps someone could cut out the pieces I need.

I'll pay £5 + p+p.

Any takers?

If anyone can help I'll post some pictures/size'es etc of the bits I want

Ta
Just the 0 BX
1 TZD Turbo a/c going going GONE
1 TD Hurricane being broken up for spares
3 FIAT 124 Sports!!!
1 FIAT 124 Spider ex. California
Oh and I nearly forgot
A LOVELY XANTIA HDI EXCLUSIVE ESTATE
User avatar
mat_fenwick
Moderator
Posts: 7326
Joined: Tue Sep 20, 2005 4:08 pm
Location: North Wales
x 19

Post by mat_fenwick »

Haven't you got enough welding on your plate with the Fiat???
User avatar
bernie
Likes welding rusty Fiats.
Posts: 196
Joined: Mon Sep 05, 2005 4:47 pm
Location: Southampton

Post by bernie »

Just want something to practise on :lol: :lol: :lol: :lol:
Just the 0 BX
1 TZD Turbo a/c going going GONE
1 TD Hurricane being broken up for spares
3 FIAT 124 Sports!!!
1 FIAT 124 Spider ex. California
Oh and I nearly forgot
A LOVELY XANTIA HDI EXCLUSIVE ESTATE
User avatar
bernie
Likes welding rusty Fiats.
Posts: 196
Joined: Mon Sep 05, 2005 4:47 pm
Location: Southampton

Post by bernie »

If I posted some pics and measurements would you be prepared to cut up your BX Jon? :?
Just the 0 BX
1 TZD Turbo a/c going going GONE
1 TD Hurricane being broken up for spares
3 FIAT 124 Sports!!!
1 FIAT 124 Spider ex. California
Oh and I nearly forgot
A LOVELY XANTIA HDI EXCLUSIVE ESTATE
User avatar
DLM
Our Trim Guru
Posts: 1620
Joined: Mon May 16, 2005 6:41 pm
Location: Gosport, Hampshire, UK
My Cars: Historically, lots of BX hatches/estates in the 90s/00s - 16/19i/17td/19d
Recent scruffy diesel n/a estate - "The Red Shed" - is no longer mine.
x 9

Post by DLM »

My opinion after seeing the original car was that it needed radical body surgery (something along the lines of a new shell!). Not only are the sills and some C-pillar sections rusted through, but one of the B-pillars is holed too. Also, working on the basis that you remove at least twice as much rust as you can see, there won't be much of the car left. Apologies for my bluntness, but that was the way I saw it.

I would have said something different until I observed John in action with the tinsnips etc. while preparing my car for welding. A quite frightening amount of metal under what seemed to be good paint had to be removed.

For reference, the pics I took are on photobucket somewhere with a title something like "Hurrricane"- I'll try and find a link for you.
Back on two wheels and pedal power for the moment.
User avatar
bernie
Likes welding rusty Fiats.
Posts: 196
Joined: Mon Sep 05, 2005 4:47 pm
Location: Southampton

Post by bernie »

Thanks for your input David but as I said to Jon

"trust me, I'm a doctor"


Nothings impossible :roll: :wink:
Just the 0 BX
1 TZD Turbo a/c going going GONE
1 TD Hurricane being broken up for spares
3 FIAT 124 Sports!!!
1 FIAT 124 Spider ex. California
Oh and I nearly forgot
A LOVELY XANTIA HDI EXCLUSIVE ESTATE
User avatar
DLM
Our Trim Guru
Posts: 1620
Joined: Mon May 16, 2005 6:41 pm
Location: Gosport, Hampshire, UK
My Cars: Historically, lots of BX hatches/estates in the 90s/00s - 16/19i/17td/19d
Recent scruffy diesel n/a estate - "The Red Shed" - is no longer mine.
x 9

Post by DLM »

Good luck then, Bernie!

I know the mechanicals and hydraulics seemed in good order (apart from the whining wheel bearing), but I'm now deeply paraniod about any BX rust within spitting distance of the rear arches and the box sections near the rear subframe mounting points. On the one hand I did see the BX estate rear wing on ebay at the moment, which gives a better idea of what is/isn't structural, but on the other hand the big hole is certainly wellwithin 30cm of the front rear subframe mounts.....(if I understand my MOT criteria correctly).


If it's any help, I have located the original pics I took when I saw the car. Shall I pass them on to Jon?
Back on two wheels and pedal power for the moment.
Post Reply