So your saying that you don't need a sensor, just a gauge and some wire?
Some pics would be appreciated.
A show of hands for BX 14 owners
- cauchoiskev
- BXpert
- Posts: 282
- Joined: Mon Aug 15, 2005 11:36 am
- Location: France
Exactly. You don't need a sensor, because there is already one on your car, which does nothing more than stop the water coming out of the engine !
Unfortunately, I can't take photos, as I have sold my 14 . However, the sensor is easy to find. Just follow the top radiator hose to where it meets the engine, and you should see a male connector which is not attatched to anything. That's the sensor.
Unfortunately, I can't take photos, as I have sold my 14 . However, the sensor is easy to find. Just follow the top radiator hose to where it meets the engine, and you should see a male connector which is not attatched to anything. That's the sensor.
- cauchoiskev
- BXpert
- Posts: 282
- Joined: Mon Aug 15, 2005 11:36 am
- Location: France
Yep, that's the one.
Clear instructions are given here on how to fit/modify the gauge :
http://www.tramontana.co.hu/citroen/cooling/cooling.php
Clear instructions are given here on how to fit/modify the gauge :
http://www.tramontana.co.hu/citroen/cooling/cooling.php