For the first time I find myself the owner of a 'Plip' - infra red control for the 16v. It doesn't work and I saw one on Ebay but hesitated before buying it because I've got no idea how one can programme the unit on the car. Possible?
Cheers
How to programme a BX for a new 'Plip'?
-
toddao
- BXpat
- Posts: 2833
- Joined: Fri Jan 12, 2007 5:01 pm
- Location: The Hegau
How to programme a BX for a new 'Plip'?
Todd
this yellow writing is really hard to read
this yellow writing is really hard to read
-
AndersDK
- BXpert
- Posts: 537
- Joined: Sat Jul 23, 2005 4:41 pm
- Location: Denmark West
- x 1
You dont programme your BX (-receiver)
- you program the PLIP hand sender unit, using a surgery knife, a soldering iron and some patience.
Have a look in the BXclub forum technical pages - it should all be covered there.
- you program the PLIP hand sender unit, using a surgery knife, a soldering iron and some patience.
Have a look in the BXclub forum technical pages - it should all be covered there.
C U / Anders - '90red16riBreak - '91GrisDolment16meteor - Project'88red19trsBreak
dead cars : '89white 16RS - '89antrasitTRDturboEst - '90white19triBreak
dead cars : '89white 16RS - '89antrasitTRDturboEst - '90white19triBreak