CV joint or driveshaft change.

tim leech · Post by **tim leech** » Fri Jan 05, 2007 6:58 pm

Where is Lockwoods by the way?

ken newbold · Post by **ken newbold** » Fri Jan 05, 2007 7:10 pm

Bradford.

tim leech · Post by **tim leech** » Fri Jan 05, 2007 10:07 pm

Do they deliver? thats a bit too far for me, think I will try and source some locally.

Ian_Fearn · Post by **Ian_Fearn** » Sat Jan 06, 2007 6:55 pm

Yes Malcolm often delivers personally in either his insterstallar mileage BX or C15.

tim leech · Post by **tim leech** » Sat Jan 06, 2007 8:23 pm

Kewl ok as soon as I "holding folding" again I will give him a ring and get a pair of driveshafts ordered

tim leech · Post by **tim leech** » Tue Jan 09, 2007 3:18 pm

Have managed to source locally for £60 each vat however they have asked dow many the do the driveshaft have? (relucter ring I expect) 29 or 90? have no idea myself anyone got a clue?

jeremy · Post by **jeremy** » Tue Jan 09, 2007 4:43 pm

Its a great deal more than 29 - so 90 is my guess. I think the 29's are for a Peugeot that uses a different form of ABS.

29 would mean an angle of 12.41 degrees between teeth - or if the diameter of the ring is 60mm - each tooth would be 6.5 mm wide. Same diameter with 90 teeth they would be 2.01 wide which sounds much more like it.

tim leech · Post by **tim leech** » Tue Jan 09, 2007 4:59 pm

Thanks jeremy, I will have alook at the spare shaft Ihave and count them up, I take it they want the number of teeth on the abs ring not the amount of splines on the driveshaft!

tom · Post by **tom** » Tue Jan 09, 2007 5:32 pm

It is 90 to confirm that.

tim leech · Post by **tim leech** » Wed Jan 10, 2007 9:41 am

Thanks Tom.