inlet manifold
-
- Confirmed BX'er
- Posts: 26
- Joined: Mon Jan 03, 2011 12:29 am
- Location: stoke on trent
inlet manifold
hi all new to the forum and am looking for a part urgent being 1.9 gti inlet maniflod plz plz help
i need 1.9 gti inlet manifold asap
What sort of urgency is there? Theoretically there's one available here.
Here, unfortunately is a field in Southern Germany where lies a breaker BX GTI which I am slowly picking clean. The engine is almost complete with its manifold still. Let us know how you get on with domestic enquiries - see what turns up - then PM me if you're stuck. I won't be able to remove it for at least a week then there's the question of postage..
Here, unfortunately is a field in Southern Germany where lies a breaker BX GTI which I am slowly picking clean. The engine is almost complete with its manifold still. Let us know how you get on with domestic enquiries - see what turns up - then PM me if you're stuck. I won't be able to remove it for at least a week then there's the question of postage..
Todd
this yellow writing is really hard to read
this yellow writing is really hard to read
- Mike E (uk)
- 1K Away
- Posts: 1115
- Joined: Sun Aug 14, 2005 9:10 am
- Location: High Wycombe, Bucks
- x 1
-
- Confirmed BX'er
- Posts: 26
- Joined: Mon Jan 03, 2011 12:29 am
- Location: stoke on trent
seached on 405 forums old classic car few breakers lost out on an ebay auction it got shipped of to another country. i have in fact almost got my hands on one just got to wait for a while. and i could eventually want another as a replacement for my 306 cab plastic inlet if its got the oval/round ports if the bolt patterns are the same. thanks for all replys thoughMike E (uk) wrote:yes, same motor in the 405.
Mike
i need 1.9 gti inlet manifold asap
-
- Confirmed BX'er
- Posts: 26
- Joined: Mon Jan 03, 2011 12:29 am
- Location: stoke on trent
how much would shipment be to uk st2 9bt ?toddao wrote:What sort of urgency is there? Theoretically there's one available here.
Here, unfortunately is a field in Southern Germany where lies a breaker BX GTI which I am slowly picking clean. The engine is almost complete with its manifold still. Let us know how you get on with domestic enquiries - see what turns up - then PM me if you're stuck. I won't be able to remove it for at least a week then there's the question of postage..
i need 1.9 gti inlet manifold asap
Hello Chris, I will be visiting the GTI wreck tomorrow - earlier than expected - to remove the rear subframe. The owner of the car and field is worried about 'the environment police' busting him for having a wreck mouldering so close to a river, so he wants rid of it ( along with an almost complete ZX Volcane ).
I will hopefully remove the inlet manifold anyway as long as the expected rain isn't too bad. Will let you know..
I will hopefully remove the inlet manifold anyway as long as the expected rain isn't too bad. Will let you know..
Todd
this yellow writing is really hard to read
this yellow writing is really hard to read
-
- Confirmed BX'er
- Posts: 26
- Joined: Mon Jan 03, 2011 12:29 am
- Location: stoke on trent
- MULLEY
- Over 2k
- Posts: 8406
- Joined: Thu Jun 22, 2006 11:10 pm
- Location: Derbyshire
- My Cars: 1999 Xsara LX 2.0HDI (90) Hatch - Fern
2002 C5 2.0 HDI (110) Estate - Jasmine - SORN
2011 Mini Cooper D Clubman - SOLD
2016 Mercedes A180D Sport - Auto refinement
1992 TZD Turbo - Bluebell - SORN
1992 TZD Turbo Estate - SORN
1991 Gti 16V - Blaze - crash damaged, will get repaired - SORN
1990 Gti 8Valve SOLD - looks like it's been scrapped
2002 Mini Cooper S - SOLD - i miss this car
1992 TXD - Scrapped in March 2014
1988 CX 25 GTI Turbo2 - SORN
1996 - AX Memphis 1.5D - Dream - SORN - x 8
Dean, is that your fabled 4x4 When you getting her back on the road & do you want a hand (i can make tea )
2002 C5 2.0 HDI Estate - Jasmine - Now SORN
2011 Mini Cooper D Clubman - SOLD
2016 Mercedes A180D Sport - Auto refinement
1992 TZD Turbo - Bluebell - My daily
1991 Gti 16V - Blaze - crash damaged, will get repaired.
1990 Gti 8Valve SOLD - looks like it's been scrapped
2002 Mini Cooper S - SOLD - i miss this car
1992 TXD - Scrapped in March 2014
1988 CX 25 GTI Turbo2 - SORN
1996 - AX Memphis 1.5D - Dream - SORN
I'm not just a username, i'm also called Matthew.
2011 Mini Cooper D Clubman - SOLD
2016 Mercedes A180D Sport - Auto refinement
1992 TZD Turbo - Bluebell - My daily
1991 Gti 16V - Blaze - crash damaged, will get repaired.
1990 Gti 8Valve SOLD - looks like it's been scrapped
2002 Mini Cooper S - SOLD - i miss this car
1992 TXD - Scrapped in March 2014
1988 CX 25 GTI Turbo2 - SORN
1996 - AX Memphis 1.5D - Dream - SORN
I'm not just a username, i'm also called Matthew.
-
- Confirmed BX'er
- Posts: 26
- Joined: Mon Jan 03, 2011 12:29 am
- Location: stoke on trent
sounds fine to me could you throw in the fuel rail as cant find mineBX596 wrote:Do you just want the manifold?Is a tenner reasonable?chris adams wrote:as for price wise a few years back i paid £25 for a 205 gti inlet + tb+ fuel rail and an fse power boost valve off a gti-6 forum member. so its got to be in these regions.
i need 1.9 gti inlet manifold asap
Is this sorted now then? I couldn't remove the one here yesterday owing to inclement weather and now it's unlikely I'll get another chance. I think postage would have been prohibitive anyway - only if you were really stuck would it have been economic.
Let us know how you get on Chris and also perhaps something about your BXing activities?
Let us know how you get on Chris and also perhaps something about your BXing activities?
Todd
this yellow writing is really hard to read
this yellow writing is really hard to read