Wanted bx 16 valve gear knob please

james cartledge · Post by **james cartledge** » Mon Feb 28, 2011 8:04 pm

Wanted bx 16 valve gear knob please

my brother has just bought a tidy ax gt, All standard apart from a stupid aftermarket gear knob so i,m after either a ax gt/gti or a bx 16 valve genuine gear knob as i,m pretty sure they was the same style

Please pm me if you have one for sale

cheers

Kitch · Post by **Kitch** » Mon Feb 28, 2011 9:28 pm

Same style but thread sizes are different.

james cartledge · Post by **james cartledge** » Mon Feb 28, 2011 9:57 pm

Kitch wrote:Same style but thread sizes are different.

Can it be glued ??

Post by **mat_fenwick** » Mon Feb 28, 2011 10:02 pm

Or drilled and tapped to suit?

Kitch · Post by **Kitch** » Mon Feb 28, 2011 11:09 pm

Well it\'s plastic, so you could drill it and just wind-it-the-fuck-on-tight!

From memory the AX one is a bigger thread, so a BX one could fit an AX with drilling, but to fit the otherway around would involve Sikaflex/lots of PTFE tape/glue/big rivnuts etc etc.

Same gearknob though, so maybe theres an insert inside it?

Post by **mat_fenwick** » Mon Feb 28, 2011 11:52 pm

Kitch wrote:to fit the otherway around would involve Sikaflex/lots of PTFE tape/glue/big rivnuts etc etc.

Bodge merchant!

Kitch wrote:Same gearknob though, so maybe theres an insert inside it?

Knowing PSA, almost certainly...

Vanny · Post by **Vanny** » Tue Mar 01, 2011 2:54 am

Matt, correction;

Kitch wrote: but to fit the otherway around would involve Sikaflex/lots of PTFE tape/glue/big rivnuts etc etc.

Knowing PSA, almost certainly...