Wanted dash tray with clock (working, of course)

messerschmitt owner · Post by **messerschmitt owner** » Tue Jun 21, 2011 8:29 am

Wanted dash tray with working clock - my clock doesn't work and I'd like to fit one that does.

Ta
Campbell

Post by **Tim Leech** » Tue Jun 21, 2011 8:59 am

Im sure I have a black one in my store, wont be going over until the weekend though.

Matt H · Post by **Matt H** » Tue Jun 21, 2011 9:07 am

I don't suppose anyone has a Pug-spec orange clock do they?

Post by **Tim Leech** » Tue Jun 21, 2011 9:16 am

Matt H wrote:I don't suppose anyone has a Pug-spec orange clock do they?

No idea, can have a look in my box of bits if you want mate.

messerschmitt owner · Post by **messerschmitt owner** » Tue Jun 21, 2011 9:29 am

should have mentioned a grey one, but I guess I can prise the clock from a black one Tim.

Let me know ...

Post by **Tim Leech** » Tue Jun 21, 2011 9:34 am

Probably have one of each to be honest, will have a look on Saturday when I go down.

Thanks

Mike E (uk) · Post by **Mike E (uk)** » Wed Jun 22, 2011 11:32 pm

I have several spare clocks, all in black.

If you are going to the meeting next month I could bring one along with the door.

Mike

messerschmitt owner · Post by **messerschmitt owner** » Thu Jun 23, 2011 8:40 am

Mike E (uk) wrote:I have several spare clocks, all in black.

If you are going to the meeting next month I could bring one along with the door.

Mike

Mike

I doubt I'll be at the meeting as I work weekends - but I am due to call round for the door in late July.

RxBX · Post by **RxBX** » Thu Jun 23, 2011 2:18 pm

Hi Campbell,

I have a clock available but I'd need to check it out first to see if it work's ?

.

Post by **Tim Leech** » Thu Jun 23, 2011 2:20 pm

RxBX wrote:Hi Campbell,

I have a clock available but I'd need to check it out first to see if it work's ?

.

Get to the back of the que please!

RxBX · Post by **RxBX** » Thu Jun 23, 2011 2:52 pm

Roverman wrote:
RxBX wrote:Hi Campbell,

I have a clock available but I'd need to check it out first to see if it work's ?

.
Get to the back of the que please!

Erm !
Do you want me to do the repair that you tasked me with (As I've not started it YET)

Did you not spot that Mike has offered one too (yesterday), BUT you've not asked/told him (As yet) to join the queue (Note the CORRECT spelling Tim) yet it only took you two minutes to tear a strip off me !

Mike E (uk) wrote:I have several spare clocks, all in black.

If you are going to the meeting next month I could bring one along with the door.

Mike

Seriously though, when you state sure or probably (but then you've got to check/confirm that you may have one) to me that's not 100% conclusive.
Mike stated hes got several spare (To me that is 100% conclusive), I've got a spare one, but it needs checking out first to see if it works which means that's a possibility of one being available !

So I hope you do have a working one available as you did offer one up first, its was only that Campbell may possibly be purchasing my spare TXD hatch interior off me is why I mentioned it, so that if he didn't take your or Mike's offer up that mine was a possible option too (If it works) !

.

Post by **Tim Leech** » Sat Jun 25, 2011 3:48 pm

Found it, Campbell send me your address and I will pop it in the post next week.

jacksun1987 · Post by **jacksun1987** » Sat Jun 25, 2011 4:50 pm

My clock in the 91 black tzd was orange. And the one in the red txd is green 92 K reg. I also remenber my grandads tzd Est j reg 92. That was green as well.