Rear height correct

ace_the_bass · Post by **ace_the_bass** » Thu Oct 06, 2011 8:12 pm

Does anyone know what the availability of these things are? Having a job getting hold of one. Also how big a job is it to fit?

ken newbold · Post by **ken newbold** » Thu Oct 06, 2011 8:39 pm

I don't have one anymore

but they're not too bad to fit, the only problem is if the pipe unions are reluctant to come undone. Other than that it's a straight forward job.

Might be worth asking on the Frenchcarforum as the early X@nt1a5 are most likely the same.

citronut · Post by **citronut** » Thu Oct 06, 2011 10:19 pm

why do you wish to replace the H/C as they very seldom go wrong,
and usualy just require a good strip down and clean,

regards malcolm

ace_the_bass · Post by **ace_the_bass** » Thu Oct 06, 2011 10:41 pm

hi malcom. im wanting to change it as it is leaking and the mot tester failed it today.
its not leaking badly but he has failed it. is it a pretty straight forward job to strip and clean it? there is no mention of it in the haynes manual i have for the car