BX ALLOYS??
- Djr88
- Confirmed BX'er
- Posts: 50
- Joined: Sat Nov 19, 2011 12:47 am
- Location: Caerphilly, South Wales.
- My Cars: 96' Frontera A 2.8 tdi sport swb
93' BX TZD cooked!! :(
03' LT35 TDI camper - x 1
BX ALLOYS??
What alloys will fit on a bx without any problems like rubbing or fouling on the arches or inner arches, etc
93' BX TZD TURBO red
- Philip Chidlow
- Over 2k
- Posts: 11594
- Joined: Fri Oct 07, 2005 1:08 pm
- Location: Chelmsford, Essex
- x 25
Well you could go for BX Speedlines in 5.5 or 6J... IF you can find a good set.
OR, any that have the following spec: PCD 4x108, 15-22ET, 65mm central hole, up to 6J.
On the 6J Speedlines the tyre size is 195/60 R14 or, on the5.5 rims would be 185/60 R14.
Peugeot and Ford alloys of the era often fit.
OR, any that have the following spec: PCD 4x108, 15-22ET, 65mm central hole, up to 6J.
On the 6J Speedlines the tyre size is 195/60 R14 or, on the5.5 rims would be 185/60 R14.
Peugeot and Ford alloys of the era often fit.
• 1992 Citroen BX TZD Turbo Hurricane
• 2006 Xsara Picasso 1.6 16v
• 2006 Xsara Picasso 1.6 16v
Take a read of our alloy wheel discussion on the 16V forum:
http://www.bx16valve.co.uk/forum/viewto ... sc&start=0
Mike P
http://www.bx16valve.co.uk/forum/viewto ... sc&start=0
Mike P
"F" White Phase 1 16V: 62K miles & seen on TV
"E" Grey Phase 1 16V: Long term project in bits
"E" Grey Phase 1 16V: Long term project in bits