Estate info please...

[JayW]

Can anyone with an estate do me a favour and measure the rear lamp clusters. Height, width and depth (protrusion from the bodyshell).

Many thanks.

[Mickey taker]

calling Mr Mat Fenwick or wooscary

[Mothman]

Hi Jay, i have an Estate rear light cluster in front of me. It measures as follows;

plastic outer cover 225 mm by 160mm at the top, 180mm at the bottom by 60mm.

The backing plate is of similar dimensions to accomodate the reflector plastic and this is 41 mm in depth.

I have looked at all 3 of my Estates and the entire lot show that the rear lights are all recessed within the tailgate to a depth of 10 mm.

Hope this helps, if you need any more info or piccies, let me know.

Andy

[Mickey taker]

oh and of course Andy

[Vanny]

plastic outer cover 2250 mm by 1600mm at the top, 1800mm at the bottom by 600mm.

2.25 metres wide, i knew the Estate was big, but i din't realise it was THAT big

[Mothman]

Sorry, just take a 0 off, ile amend the original post.

Andy

[JayW]

Cheers Andy, Muchos Appreciatos!

See Wanted post...

[Wooscary]

calling Mr Mat Fenwick or wooscary

What about Ian? Oh wait, his estate probably doesn't even have rear lights?

[citronut]

i also am running a K reg TZD estate now in a very rare colour "RED" , but im eating my lunch at the mo

regards malcolm

[Mickey taker]

calling Mr Mat Fenwick or wooscary

What about Ian? Oh wait, his estate probably doesn't even have rear lights?

Nah you would have to measure Ians in feet and inches and would need an abacus to do the calculations