Howdy all,
Driveshaft removal (entirely), hasn't been as intuitive on the TZI as I'd hoped.
Its part of the engine/gearbox removal set of sequences.
Can someone kindly give me the tips on driveshaft(s) removal?
Thanks & regards,
Rhys
Driveshaft removal tips welcome
-
rhysaccess
- New Member
- Posts: 12
- Joined: Sun Mar 20, 2022 10:43 am
- Location: Perth, Western Australia
- My Cars: Citroen BX TZI Estate
Citroen SM
Citroen C5X7 3.0 Touring
Citroen 2CV
Citroen DS21
Panhard 24CT
SAAB 96 Sport
Amphicar 770
Chevrolet Corvair Corsa Turbo Sport Coupe
Chevrolet Corvair Rampside
Chevroletr Corvair Monza Convertible
-
rutter123
- Over 2k
- Posts: 2695
- Joined: Sun Sep 02, 2012 9:54 pm
- Location: South Lincs
- My Cars: 90 Bx Tzd turbo ven red 295k
74 D Super 5 black
05 Volvo V50 2.0d 180k
65 Peugeot Boxer work van 280k - x 137
Re: Driveshaft removal tips welcome
Usually straightforward don't forget the 2 hidden bolts holding the intermediate bearing.
90 BX Tzd turbo 294k SORN undergoing major surgery
90 BX Tzd turbo estate 46k awaiting surgery
65 Peugeot Boxer Van the new workhorse
52 Toyota Rav4 180k Bulletproof Jap reliability
90 BX Tzd turbo estate 46k awaiting surgery
65 Peugeot Boxer Van the new workhorse
52 Toyota Rav4 180k Bulletproof Jap reliability
-
rhysaccess
- New Member
- Posts: 12
- Joined: Sun Mar 20, 2022 10:43 am
- Location: Perth, Western Australia
- My Cars: Citroen BX TZI Estate
Citroen SM
Citroen C5X7 3.0 Touring
Citroen 2CV
Citroen DS21
Panhard 24CT
SAAB 96 Sport
Amphicar 770
Chevrolet Corvair Corsa Turbo Sport Coupe
Chevrolet Corvair Rampside
Chevroletr Corvair Monza Convertible
Re: Driveshaft removal tips welcome
Turns out it was all pretty easy -probably did it in about the same it took me to type this post.
I just like to plan where possible, to save hours on the day.
The two exhaust manifold/down pipe 10mm bolts were less obliging.....
Regards,
Rhys
I just like to plan where possible, to save hours on the day.
The two exhaust manifold/down pipe 10mm bolts were less obliging.....
Regards,
Rhys