Inner wing required urgently..............

Kevin B · Post by **Kevin B** » Wed Aug 27, 2008 9:04 am

I am urgently looking for an inner wing (passenger side) for a BX TZD Estate. Realising that new panel are rare as hens teeth, I would be happy to cut a good s/h inner wing from a car thats being scrapped (any BX would do as long as its not got a bad infestation of tin worm in this area) as I also need the sheet metal work that supports the headlight.
My location is West Berkshire so it would be preferable if any potential donors are within say 100 miles, as I am more than happy to collect.

Any assistance would be greatly appreciated. Thanks in anticipation.

Vanny · Post by **Vanny** » Wed Aug 27, 2008 9:17 am

I've got a who BX front thats due to go to scrap, the passenger side is in fairly decent fettle (i drove over the dirves side with the land rover

).

Bit of a drive up to here though. Just how much of it do you need?

demag · Post by **demag** » Thu Aug 28, 2008 10:28 am

I noticed one on ebay last night can't remember what side though. AEP Direct in Glasgow.

Looks like they're emptying out all old Citroen stock.

Kevin B · Post by **Kevin B** » Mon Sep 01, 2008 9:21 am

Thanks for the offer Vanny, and many thanks to Demag. As I have now bought the inner wing via ebay.

That was a really good find, my thanks for bringing it to my attention, much appreciated.

I see this seller is also selling 5 complete rear hatchback boot body panel sections (another well known BX rot spot along the rear edge of the boot).

Vanny · Post by **Vanny** » Mon Sep 01, 2008 9:36 am

i could do with one of them for the trailer, but its far away and expensive, so i will patch it to death instead